IAC Approved Devices v002

View approved devices by: Device Type | Expiry Date | Search
Conditions / Comments: Show All | Hide All

 

 UNATTENDED PAYMENT TERMINALS

These UPTs have been granted an approval period of three years from the date they were approved by the APCA Evaluation Review Sub-Committee

MakeModelApproval
Type
Approval
Expiry
Conditions/
Comments
ACS Solutions Switzerland Ltd TTA Expert 900 26/06/2018

Hardware version:
Product part no.: "800.xxx/yy"
Enclosure: "EFT-Support combined"
Enclosure part no.: "851.3416/01"
EPP: Intellect Solo 510, version: 510-xxxx-yy

Firmware version: EPP firmware: "SK00040104"
Software version: 3005

DPS: Direct Payment Solutions SKP200 & SCR200 07/12/2018 Yes (click)

Hardware version: PIN Pad Display: SKP200: Release X
Secure Card Reader: SCR200: Release X
Secure Card Reader: SCR200RM: Release X
Firmware version: PIN Pad Display: DPSSKP200 v1.0xx
PIN Pad Display: DPSSKP200 v1.3.x.x
Secure Card Reader: DPSSCR200 v1.2.x.x
Secure Card Reader: DPSSCR200 v1.3.x.x
Software version: NA

Conditions /Comments:

DPS: Direct Payment Solutions SKP200E & SCR200E 09/10/2020 Yes (click)

Hardware version: PIN Pad Display: SKP200E: Release C
Secure Card Reader: SCR200E: Release B
Firmware version: PIN Pad Display: DPSSKP200E v1.3xx
Secure Card Reader: SRC200E v1.3.x.x
Software version: NA

Conditions /Comments:

Each of these components may be deployed in combination with the complementing component of the listed SKP200 & SCR200 UPT.

Gilbarco Gilbarco M3c 17/12/2019 Yes (click)

Hardware version: Display: SPOT M3c Display Rev. B
Keyboard: GVR SPOT Keypad Unit 2.0, Rev. B
Card Reader: MagTek HCR2 Rev 14.x , Rev17.x, Rev 17.1
Firmware version: OS: 01.03 & 01.04
MagTek HCR2: E0x, H0x, J0x, J03, J05
PIN Pad: 03.01, V03.02, V3.04, 03.05
Software versions:

  • AS2805 V03.01
  • AS2805 V03.02

Conditions /Comments:

Gilbarco SPOT M3c 26/07/2020

Hardware version: Display: SPOT M3c Display Rev.B
Keyboard: GVR SPOT Keypad Unit 2.0 Rev.B
Card Reader: Panasonic Reader (manual, with MSR data protection)
Firmware version: OS 01.03, PIN Pad 01.05, PIN Pad 01.07
Software versions:

  • AS2805 01.01 (Single Acquirer)
  • AS2805 02.00 (Dual-Acquirer)
Ingenico SCR iUR2xx & SPP iUP2xx 30/08/2018 Yes (click)

Hardware version: SCR iUR2xx: iUR2xx-01Txxxx
SPP iUP2xx: iUP2xx-01Txxxx
Firmware version: SCR iUR2xx: iUR2xx 820514 V01.xx (Base firmware), 820365 V02.xx (Key Schemes)
SPP iUP2xx: iUP2xx 820305 V01.xx (Base firmware), 820365 V02.xx (Key Schemes)
820073 V1.xx (Open Protocol module)
Software versions:

  • Payment app: ANZ v9.39

  • Payment app: Coles v9.00

  • Middleware app: TSA v1.10
  • Middleware app: TSA v1.12

Conditions /Comments:

Invenco G6OPT 08/03/2019 Yes (click)

Hardware version: 01.00.xx
1.06
1.07
Firmware version: 01.00.xx
2.01
v2.06.16
Software version: No Application Approved

Conditions /Comments:

Payment Express Limited SKP200 & SCR200 07/12/2018 Yes (click)

Hardware version: PIN Pad Display: SKP200: Release X
Secure Card Reader: SCR200: Release X
Secure Card Reader: SCR200RM: Release X
Firmware version: PIN Pad Display: DPSSKP200 v1.0xx
PIN Pad Display: DPSSKP200 v1.3.x.x
Secure Card Reader: DPSSCR200 v1.2.x.x
Secure Card Reader: DPSSCR200 v1.3.x.x
Software version: NA

Conditions /Comments:

Payment Express Limited SKP200E & SCR200E 09/10/2020 Yes (click)

Hardware version: PIN Pad Display: SKP200E: Release C
Secure Card Reader: SCR200E: Release B
Firmware version: PIN Pad Display: DPSSKP200E v1.3xx
Secure Card Reader: SRC200E v1.3.x.x
Software version: NA

Conditions /Comments:

Each of these components may be deployed in combination with the complementing component of the listed SKP200 & SCR200 UPT.

Quest Paystation 13/05/2018 Yes (click)

Hardware version: 800-0012-06-SxxxxxxU
Firmware version: 03.xx.yy
Software version: n/a

Conditions /Comments:

Quest UT430 28/05/2020 Yes (click)

Hardware version: 800-0050-0X
800-0050-1x
Firmware version: 05.xx.xy
06.xx.yy
07.xx.yy
Software version: N.A.

Usage Comments:

PIN shielding depends on the design of the vending machine following the vendor’s (Quest’s) specific design recommendations detailed in the UT430 Installation guide [section “recommendation for PIN entry privacy” of InstGuide]

VeriFone UX100 30/07/2020 Yes (click)

Hardware version: UX100 (EPP): M159-10x-xx-xxx
UX100 (EPP): M159-10x-xx-xxx Rev Bxx
UX100 (EPP): M159-10x-xx-xxx Rev Cxx

UX300 (SCR): M159-30x-xxx-xxx
UX300 (SCR): M159-30x-xxx-xxx-B
UX301 (SRC): M159-30x-xxx-xxx
Firmware version:
UX100 (EPP): FWUX 01.05.xx
UX100 (EPP): FWUX 01.06.xx
UX300 (SCR) & UX301 (SRC) :
Vault 4.x.x, 7.x.x
OP 4.x.x, 5.x.x
SRED 4.x.x
AppManager 4.x.x

Software version: No Application yet approved

Conditions /Comments:

Usage Comments:

VeriFone UX110 30/07/2020 Yes (click)

Hardware version: UX110 (EPP): M159-11x-xx-xxx
UX110 (EPP): M159-11x-xx-xxx Rev Bxx
UX110 (EPP): M159-11X-XX-XXX Rev CXX

UX300 (SCR): M159-30x-xxx-xxx
UX300 (SCR): M159-30x-xxx-xxx-B
UX301 (SCR): M159-301-xxx-xxx
UX301 (SCR): M159-301-xxx-xxx-Rev Bxx
Firmware version:
UX110 (EPP): FWUX 01.05.xx
UX110 (EPP): FWUX 01.06.xx
UX300/UX301 (SCR):
Vault 4.x.x, 7.x.x, 7A.x.x, 12.x.x.
OP 4.x.x, 5.x.x, 7.x.x
SRED 4.x.x, 5.x.x
AppManager 4.x.x,4A.x.x, 6.x.x

Software version: No Application has yet been approved

Conditions /Comments:

This device must be used with an approved secure display

VeriFone UX300 30/07/2020 Yes (click)

Hardware version: SRC: UX300: M159-30x-xxx-xxx
SRC: UX300: M159-30x-xxx-xxx-B

UX100 (EPP): M159-10x-xx-xxx
UX100 (EPP): M159-10x-xx-xxx Rev Bxx
UX100 (EPP): M159-10x-xx-xxx Rev Cxx

UX110 (EPP): M159-11x-xx-xxx
UX110 (EPP): M159-11x-xx-xxx Rev Bxx
UX110 (EPP): M159-11x-xx-xxx Rev Cxx
Firmware version:
UX3100 (SCR):
Vault 4.x.x, 7.x.x, 7A.x.x, 12.x.x
OP 4.x.x, 5.x.x, 7.x.x
SRED 4.x.x, 5.x.x
AppManager 4.x.x, 4A.x.x, 6.x.x

UC110 (EPP): FWUX 01.05.xx, FWUX 01.06.xx


Software version: No Application has yet been approved

Conditions /Comments:

UX110 (EPP): See entry for UX110 for additional condition
A) Optionally either the UX400 or UX401, non-security relevant analogue antenna components of the UPT may be used.

Usage Comments:

VeriFone UX301 30/07/2020 Yes (click)

Hardware version: SRC: UX301: M159-301-xxx-xxx
SRC: UX301: M159-301-xxx-xxx Rev Bxx

EPP: UX100: M159-10x-xx-xxx
EPP: UX100: M159-10x-xx-xxx Rev Bxx
EPP: UX110: M159-11x-xx-xxx
EPP: UX110: M159-11x-xx-xxx Rev Bxx
EPP: UX110 : M159-11x-xx-xxx Rev Cxx
Firmware version: SCR: UX301:
Vault 4.x.x, 7.x.x, 7A.x.x, 12.x.x
OP 4.x.x, 5.x.x, 7.x.x
SRED 4.x.x, 5.x.x
AppManager 4.x.x, 4A.x.x, 6.x.x

EPP: UX100: FWUX 01.05.xx

Software version: No Application has yet been approved

Conditions /Comments:

Usage Comments:

XAC Automation Corp EPP: UPT-303 & SCR: P90 07/08/2019 Yes (click)

Hardware version: EPP: xUPT-303: TOK7XXEX39XX4X
SCR: P90: SHR1XOXXXX64CX
Firmware version: EPP: xUPT-303: 20010651
SCR: P90: 20000112
Software version: POSiQ (Caltex) 1.0.X.X

Conditions /Comments: