IAC Approved Devices v002

View approved devices by: Device Type | Expiry Date | Search
Conditions / Comments: Show All | Hide All
Filter by Device Type: Show All | ATM DEVICES | EFTPOS PIN ENTRY DEVICES | ENCRYPTING PIN PADS | KEY LOADING AND TRANSFER DEVICES | SECURITY CONTROL MODULES | UNATTENDED PAYMENT TERMINALS

 

 

Approval Expires 03/10/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoISC2xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iSC2xx-01Txxxxx
Firmware version: 820518 V01.xx
820365 V02.xx (key schemes)
820073 V1.x (Open Protocol module)
Software versions:

  • Payment app: ANZ v9.39

  • Payment app: Coles v9.00

  • Middleware app: TSA v1.11
  • Middleware app: TSA v1.12

Conditions /Comments:


Approval Expires 20/09/2021

MakeModelTypeApproval
Type
Conditions/
Comments
Atos Worldline SA/NVBanksys XENTAEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 90640000 02
906400000x REV_J, REV_Jx
906400000x REV_K, REV_Kx
906400000x REV_L, REV_Lx

Firmware version: 87.01.10
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:

Atos Worldline SA/NVBanksys XENTISSIMOEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 906600000x
906600000x REV_E, REV_Ex
906600000x REV_F, REV_Fx
906600000x REV_G, REV_Gx
Firmware version: 87.01.10
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:

Atos Worldline SA/NVC-ZAM/XentissimoEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 906600000x
906600000x REV_E, REV_Ex
906600000x REV_F, REV_Fx
906600000x REV_G ,REV_Gx
Firmware version: 87.01.10
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:

BanksysBanksys XENTISSIMOEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 906600000x
906600000x REV_E, REV_Ex
906600000x REV_F, REV_Fx
906600000x REV_G, REV_Gx
Firmware version: 87.01.10
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:

BanksysC-ZAM/XentissimoEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 906600000x
906600000x REV_E, REV_Ex
906600000x REV_F, REV_Fx
906600000x REV_G ,REV_Gx
Firmware version: 87.01.10
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:


Approval Expires 08/09/2021

MakeModelTypeApproval
Type
Conditions/
Comments
ThalesHSM8000SECURITY CONTROL MODULES - SERIES 2

Hardware version: HSM8-xxxxx
Firmware version: 3.0
Software version: 3.0x 1110-08yy


Approval Expires 30/08/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoSCR iUR2xx & SPP iUP2xxUNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: SCR iUR2xx: iUR2xx-01Txxxx
SPP iUP2xx: iUP2xx-01Txxxx
Firmware version: SCR iUR2xx: iUR2xx 820514 V01.xx (Base firmware), 820365 V02.xx (Key Schemes)
SPP iUP2xx: iUP2xx 820305 V01.xx (Base firmware), 820365 V02.xx (Key Schemes)
820073 V1.xx (Open Protocol module)
Software versions:

  • Payment app: ANZ v9.39

  • Payment app: Coles v9.00

  • Payment app: ADVAM ITSS V1.0.x
  • Middleware app: TSA v1.10
  • Middleware app: TSA v1.12

Conditions /Comments:


Approval Expires 28/08/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoEFT930EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: EFT930x-xxxx0101, EFT930B-xxxx0201, EFT930x-xxxx1101, EFT930x-xxxx2101
Firmware version: v01.01
Software version: v03.xx

SagemEFT930EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: EFT930x-xxxx0101, EFT930B-xxxx0201, EFT930x-xxxx1101, EFT930x-xxxx2101
Firmware version: v01.01
Software version: v03.xx


Approval Expires 01/08/2021

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-2x-AUx
Firmware version: QA0005A3
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software versions:

  • CitiPOS 1.14, using security script P3Crypto 1.12
  • SoftPay Base 3.0:Pulse 3.1.xx,using security scripts PULH0001 and PULH0001b
  • SoftPay Base 3.0:Pulse 4.1.xx,using security scripts PULH0001 and PULH0001b
  • SoftPay Base 3.0:Pulse 4.2.xx,using security scripts PULH0001 and PULH0001b
  • Daybreak software v112 using security script P3Crypto
  • PAYware POS Bendigo application version 2.3.xx
  • PAYware POS Bendigo application version 3.3.xx security script BBLSPS01

Conditions /Comments:

VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-2x-AUx
Firmware version: QA0005A3
QA0008A4
QA0010A0
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software versions:

  • V2.5f Release Pack 9 using security script CRYPT001
  • PAYware POS Bendigo application version 3.3.xx security script BBLSPS01

Conditions /Comments:


Approval Expires 16/07/2021

MakeModelTypeApproval
Type
Conditions/
Comments
SafeNetProtectHost EFTSECURITY CONTROL MODULES - SERIES 2

Hardware version: PH EFT
Firmware version: Software version: AMB A10.01.03
Software version: 4.6.3


Approval Expires 26/06/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoI5100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: I5100PHT009A I5100MH01
Firmware version: Unicapt32.2.x.x
Software versions:

  • API Version: SSA AU00013 application: ANZ EFTPOS Version 8.09
  • API SSA 00.27
  • API SSA 00.27, application AU1X83_Coles
  • API SSA 00.28
  • API SSA 00.29
  • API SSA 00.32
  • API SSA 00.33
  • API SSA 00.39
  • API SSA 00.41,
  • API SSA 00.44,
  • API SSA 00.50

Conditions /Comments:

IngenicoI5100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: I5100MP12, I5100PHT009A
Firmware version: Unicapt32.2.x.x
Software versions:

  • API SSA 00.27
  • API SSA 00.28
  • API SSA 00.29
  • API SSA 00.39,
  • API SSA 00.41,
  • API SSA 00.44,
  • API SSA 00.50

Conditions /Comments:

IngenicoI6280EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: i6280Hxx
Firmware version: Unicapt32.2.x.x
Software versions:

  • API Version: SSA AU00013 application: ANZ EFTPOS Version 8.09
  • API SSA 00.27
  • API SSA 00.27, application AU1X83_Coles
  • API SSA 00.28
  • API SSA 00.29
  • API SSA 00.32
  • API SSA 00.33
  • API SSA 00.39
  • API SSA 00.41,
  • API SSA 00.44,
  • API SSA 00.50
IntellectSolo 510ENCRYPTING PIN PADS - SERIES 2 Yes (click)

Hardware version: 510-xxxx-yy
Firmware version: SK00040104
Software version: Secure API v1.27

Conditions /Comments:

ACS Solutions Switzerland LtdTTA Expert 900UNATTENDED PAYMENT TERMINALS - SERIES 2

Hardware version:
Product part no.: "800.xxx/yy"
Enclosure: "EFT-Support combined"
Enclosure part no.: "851.3416/01"
EPP: Intellect Solo 510, version: 510-xxxx-yy

Firmware version: EPP firmware: "SK00040104"
Software version: 3005


Approval Expires 10/06/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoMove/5000EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: MOV50AA
MOV50BA - Contactless
MOV50JA - Contactless
MOV50CA - No contactless, with privacy shield
MOV50DA - Contactless with privacy shield
MOV50AB - No contactless with revised mainboard
MOV50BB - Contactless, revised main board
MOV50CB - No contactless, with privacy shield and revised main board
MOV50DB - Contactless, with privacy shield and revised main board
MOV50JB - Contactless, desktop, with revised main board

Firmware version: 820547v01.xx
820376v01.xx
820548v01.xx - Open Protocol
820548v02.xx - Open Protocol
Software versions:

  • Payment App: NAB v00.09.00

  • Middleware App: TSA V1.20
  • Middleware App: Merchant Entry v00.56.00
  • Middleware App: Business Logic V00.64.00

  • Payment App: Westpac v00.06.00

  • Middleware App: TSA V1.26
  • Middleware App: Merchant Entry v00.78.00
  • Middleware App: Business Logic V01.00.00

  • Payment App: CBA v8.00.xx
  • Payment App: CBA v9.00.xx

  • Middleware App: TSA V1.26
  • Middleware App: Merchant Entry v00.78.00
  • Middleware App: Business Logic V01.00.00

Approval Expires 21/05/2021

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneP400/P400 PlusEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H435-07-02-xxx-x0-B0
H43-07-32-xxx-x0-B0(w/BT, Wi-Fi)
Firmware version: Vault: 7.x.x.x
AppM: 11.x.x.x
SRED: 7.x.x.x
OP: 1.x.x
Software version: Adyen 1.xx.xx

Conditions /Comments:


Approval Expires 13/05/2021

MakeModelTypeApproval
Type
Conditions/
Comments
QuestQT720EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: 800-0025-0X
800-0025-1X
800-0025-2X
Firmware version: 04.XX.YY
06.XX.YY
Software version: n/a

VeriFoneVx670EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M267-x7x-xx-xxx
Firmware version: QD0007A1
QD0007A2
QD0007A3
QD0008A1
QD0008A2
QD0008A3
QD0008A4
QD0008A5
QD0009A0
QD0009A1
QD0009A2
QD0009A3
QD0011A0
QD0011A1
QD00012A1
Software versions:

  • APCA 001
  • PAYware POS Bendigo 3.3.xx Security Script BBLPS01

Conditions /Comments:

VeriFoneVx670EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M267-x7x-xx-xxx
Firmware version: QD0007A1
QD0007A2
QD0007A3
QD0008A1
QD0008A2
QD0008A3
QD0008A4
QD0008A5
QD0009A0
QD0009A1
QD0009A2
QD0009A3
QD0011A0
QD0011A1
QD00012A1
Software versions:

  • CitiPOS 1.14: security script: P3Cryto 1.12
  • PAYware POS MBL V1.5.xx: security script MBL_0002
  • SoftPay Base 2.20 V1.3.xx: security script BBLSPS01
  • SoftPay Base 3.0:PULSE 4.2.xx: security scripts PULH0001 & PULH0001b
  • CBA Application V1.2.xx
  • FPOZ 3.x.xx: security script CRYPT001
  • PAYware POS Bendigo V3.3.xx: Security Script BBLSPS01
VeriFoneVx670EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M267-x7x-xx-xxx
Firmware version: QD0007A1
QD0007A2
QD0007A3
QD0008A1
QD0008A2
QD0008A3
QD0008A4
QD0008A5
QD0009A0
QD0009A1
QD0009A2
QD0009A3
QD0011A0
QD0011A1
QD00012A1
Software versions:

  • FPOZ v2.x, security script CRYPT001
  • PAYware POS Bendigo 3.3.xx security script BBLSPS01

Conditions /Comments:

QuestPaystationUNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: 800-0012-06-SxxxxxxU
Firmware version: 03.xx.yy
Software version: n/a

Conditions /Comments:


Approval Expires 10/05/2021

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneP200/P200 PlusEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H430-07-02-xxx-x0-B0
H430-07-32-xxx-x0-B0(w/BT, Wi-Fi)
Firmware version: Vault: 7.x.x.x
AppM: 11.x.x.x
SRED: 7.x.x.x
OP: 1.x.x
Software version: no payment application yet approved

Conditions /Comments:

VeriFoneP200/P200 PlusEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H430-07-02-xxx-x0-B0
H430-07-32-xxx-x0-B0(w/BT, Wi-Fi)
Firmware version: Vault: 7.x.x.x
AppM: 11.x.x.x
SRED: 7.x.x.x
OP: 1.x.x
Software version: no payment application yet approved

Conditions /Comments:


Approval Expires 06/05/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoDESK/5000EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: DES50AA
DES50BA - Contactless
DES50CA - no contactless with privacy shield
DES50DA - Contactless with privacy shield
DES50AB - No contactless, revised hardware
DES50BB - Contactless with revied hardware
DES50CB - No contactless with privacy shield and revised hardware
DES50DB - Contactless with privacy shield and revised hardware
Firmware version: 820547v01.xx
820376v01.xx
820548v01.xx - Open Protocol
820548v02.xx -Open Protocol
Software versions:

  • Payment App: NAB v00.09.00

  • Middleware app: TSA V1.20
  • Middleware app: Merchant Entry v00.56.00
  • Middleware app: Business Logic V00.64.00

  • Payment App: Westpac v00.06.00

  • Middleware App: TSA V1.26
  • Middleware App: Merchant Entry v00.78.00
  • Middleware App: Business Logic V01.00.00

Conditions /Comments:


Approval Expires 15/04/2021

MakeModelTypeApproval
Type
Conditions/
Comments
GRG Banking Equipment Co. LtdH22NLATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: v1.0.0.x
EPP: EPP-002: YT2.232.013Vx.x
Firmware version: ATM: V1.xx
EPP: V1.xx
Software version: v3.1.xSPxx

Conditions /Comments:

GRG BankingE300LATM DEVICES - SERIES 2

Hardware version: ATM Hardware v1.0.0.X
EPP-002 Hardware YT2.232.013Vx.x
Firmware version: EPP-002 v1.xx
Software version: v3.1.0 rev2
v3.1.x SPxx

GRG BankingE300LATM DEVICES - SERIES 2

Hardware version: ATM Hardware v1.0.1.X
EPP-002 Hardware YT2.232.013Vx.x
Firmware version: EPP-002 v1.xx
Software version: v3.1.0 rev2
v3.1.x SPxx

GRG BankingH22NATM DEVICES - SERIES 2

Hardware version: ATM Hardware v1.0.0.x
EPP-002 Hardware YT2.232.013Vx.x
Firmware version: EPP-002 v1.xx
Software version: v3.1x SPxx

IngenicoEFT930EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: EFT930x-xxxx0102, EFT930x-xxxx1102
Firmware version: 820065V01.V03
Software version: v03.xx

MPOS (Golden Port Technology)PositronEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: v1-0xxxxxxxxx
Firmware version: APCA Firmware v2.0
Software version: APCA Application V2.0.0

Conditions /Comments:

GRG BankingEPP-002ENCRYPTING PIN PADS - SERIES 2 Yes (click)

Hardware version: YT2.232.013Vx.x
Firmware version: v1.xx
Software version: n/a

Conditions /Comments:


Approval Expires 10/04/2021

MakeModelTypeApproval
Type
Conditions/
Comments
LipmanNurit 8210EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 8210ccxxyyy or 8210-cc-Mxx-yyy-zzz
Firmware version: NOS7-SPED-FW Version 2.03.28

Conditions /Comments:

VeriFoneNurit 8210EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 8210ccxxyyy or 8210-cc-Mxx-yyy-zzz
Firmware version: NOS7-SPED-FW Version 2.03.28

Conditions /Comments:

ThalesHSM8000SECURITY CONTROL MODULES - SERIES 2

Hardware version: HSM8-xx3xx
Firmware version: 2.3
Software version: ANZ 1003-0808


Approval Expires 31/03/2021

MakeModelTypeApproval
Type
Conditions/
Comments
PAX Computer Technology (Shenzhen)PAX D200EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: D200-xxx-xx3-0xxx
Firmware version: 1.6
Software version: SmartPay: BBL_SPS_EFTPOS 4.1.x

PAX Computer Technology (Shenzhen)PAX D210EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: D210-xxx-xx3-0xxx
Firmware version: D210 PED 1.3
Software version: SmartPay: BBL_SPS_EFTPOS 4.1.x

PAXPAX D200EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: D200-xxx-xx3-0xxx
Firmware version: 1.6
Software version: SmartPay: BBL_SPS_EFTPOS 4.1.x


Approval Expires 22/03/2021

MakeModelTypeApproval
Type
Conditions/
Comments
CrypteraINT1217ENCRYPTING PIN PADS - SERIES 2 Yes (click)

Hardware version: INT1217-5410-R1x
Firmware version: 414-0639 R1x with loader 414-0387 R2Y
Software version: No Appliaction yet submitted

Conditions /Comments:

Due to Key Management constraints this device is approved only for use in ATMs


Approval Expires 21/03/2021

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneV400c/V400c PlusEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H425-07-03-xxx-xx-B0 (V400c)
H425-07-03-xxx-xx-B1 (V400c)
H425-07-33-xxx-xx-B0 (V400c Plus)
H425-07-33-xxx-xx-B1 (V400c Plus)
Firmware version: VAULT: 7.x.x
AppM: 11.x.x
VFSRED: 7.x.x
VFOP: 1.x.x
Software version: Adyen 1.xx.xx

Conditions /Comments:

CrypteraINT1218ENCRYPTING PIN PADS - SERIES 2 Yes (click)

Hardware version: INT1218-5410-R1x
Firmware version: 414-0639 R1x with loader 414-0387 R2Y
Software version: No Application yet submitted

Conditions /Comments:

Due to Key Management constraints this device is only approved for use with ATMs


Approval Expires 18/03/2021

MakeModelTypeApproval
Type
Conditions/
Comments
Atos Worldline SA/NVDEP T6KEY LOADING AND TRANSFER DEVICES - SERIES 2 Yes (click)

Hardware version: DEP/T6:906200000
DEP/PCI:996550000
Firmware version: DEP/T6
FPB Firmware: v05.14
CMB Bios: v01.00
CMB Firmware: v04.02
CMB API: v0140
Host Application V02.06

DEP/PCI
Boot: 4.0.l
Alarm: 5.0.m
FPGA: 66 14 42
Application: SMAT 3.0c
Application: SMAT 3.1a
Software version: Host Application: v02.06

Conditions /Comments:

This device is not approved for transaction processing.
The C-ZAM/DEP Xentissimo key entry terminal must be stored and operated under dual control.


Approval Expires 08/03/2021

MakeModelTypeApproval
Type
Conditions/
Comments
MagTekDynaPro GoEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: 34PCI2x0Ax
Firmware version: 1000004594-Ax-PCI
Software version: N/A


Approval Expires 07/03/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoI5310EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: l5310PHTE02B I5310MH10
Firmware version: Unicapt32.2.x.x
Software versions:

  • API Version: SSA AU00013 application: ANZ EFTPOS Version 8.09
  • API SSA 00.27
  • API SSA 00.27, application AU1X83_Coles
  • API SSA 00.28
  • API SSA 00.29
  • API SSA 00.32
  • API SSA 00.33
  • API SSA 00.39
  • API SSA 00.41,
  • API SSA 00.44,
  • API SSA 00.50
IngenicoI6510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: I6510MMQ002A I65AAMH02
Firmware version: Unicapt32.2.x.x
Software versions:

  • API Version: SSA AU00013
  • API SSA 00.27
  • API SSA 00.27, application AU1X83_Coles
  • API SSA 00.28
  • API SSA 00.29
  • API SSA 00.32
  • API SSA 00.33
  • API SSA 00.39
  • API SSA 00.41,
  • API SSA 00.44,
  • API SSA 00.50

Conditions /Comments:


Approval Expires 28/02/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoiCT2xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iCT2xx-11Txxxxx
Firmware version: 820305 V02.xx
Software versions:

  • TSA v1.05
  • TSA v1.07
  • TSA v1.10
  • TSA v1.11

Conditions /Comments:

Acquirers are to note that the named Data Key is not used for multiple purposes.

IngenicoiCT2xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iCT2xx-11Txxxxx
Firmware version: 820305 V02.xx
Software versions:

  • Payment app: ANZ v9.39

  • Payment app: Coles v9.00

  • Middleware app: TSA v1.12

Conditions /Comments:

Acquirers are to note that the named Data Key is not used for multiple purposes.


Approval Expires 25/02/2021

MakeModelTypeApproval
Type
Conditions/
Comments
MagTekDynaProEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: 31PCI2308A
31PCI2308B
31PCI4308A
31PCI4308B
31PCI2508A
31PCI2508B
31PCI4508A
31PCI4508B
Firmware version: 30050851CxxPCI
30050855CxxPCI
Software version: Not Applicable


Approval Expires 22/02/2021

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoiMP3xx (iSMP)EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iMP3xx-01Txxxxx
Firmware version: 820305 V01.xx
Software versions:

  • TSA v1.07
  • TSA v1.05
  • TSA v1.10
  • TSA v1.11

Conditions /Comments:

Acquirers are to note that the named Data Key is not used for multiple purposes.

IngenicoiMP3xx (iSMP)EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: iMP3xx-01Txxxxx
Firmware version: 820305 V01.xx
Software versions:

  • Payment app: ANZ v9.39

  • Payment app: Coles v9.00

  • Middleware app: TSA v1.12

Approval Expires 20/02/2021

MakeModelTypeApproval
Type
Conditions/
Comments
PAXA930EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: A930-xxx-Rx5-0xxx (w/ CTLS)
A930-xxx-0x5-0xxx (w/o CTLS)
Firmware version: 25.00.xxxx
Software version: None yet approved

Conditions /Comments:


Approval Expires 08/02/2021

MakeModelTypeApproval
Type
Conditions/
Comments
GenmegaG2500ATM DEVICES - SERIES 2

Hardware version: ATM : 31111950-1
Hanmega EPP-B3: 20120753-1
Firmware version: ATM: BIOS: V06.01.12
ATM: Data Table: V02.70.10
Hanmega EPP-B3 - Firmware#: v04.09.XX
Software version: VAx.01.xx

GenmegaG3500PATM DEVICES - SERIES 2

Hardware version: ATM: 31111948-1
Hanmega EPP-B3: 20120753-1
Firmware version: ATM: BIOS: V06.01.12
ATM: Data Table: V02.70.10
Hanmega EPP-B3 - Firmware#: v04.09.XX
Software version: VAx.01.xx


Approval Expires 01/02/2021

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneV205c/V200tEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H470-07-03-xxx-x0-B0(V205c)
H470-07-0B-xxx-x0-B0(V200t 3G)
H470-07-3B-xxx-x1-B0(V200t 3G Plus)
Firmware version: VAULT: 7.x.x
AppM: 11.x.x
VFSRED: 7.x.x
VFOP: 1.x.x
Software version: No payment application yet approved

Conditions /Comments:


Approval Expires 23/12/2020

MakeModelTypeApproval
Type
Conditions/
Comments
NCRSelfServ 16ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 2016 9999
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software versions:

  • APTRA ADVANCE NDC 03.04.xx.xx,
  • Self Service Assistant for APTRA 02.01.00,
  • Security for APTRA 03.01.00,
  • SM Primitives for APTRA 02.00.01

Conditions /Comments:

NCRSelfServ 22eATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 2012 9999
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software version: APTRA ADVANCE NDC 03.04.xx.xx,
Self Service Assistant for APTRA 02.01.00,
Security for APTRA 03.01.00,
SM Primitives for APTRA 02.00.01

Conditions /Comments:

NCRSelfServ 22ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 6622 9999
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
ATM: APTRA XFSv3 6.01.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software versions:

  • APTRA ADVANCE NDC 03.04.xx.xx
  • Self Service Assistant for APTRA 02.01.00
  • Security for APTRA 03.01.00
  • SM Primitives for APTRA 02.00.01
  • VISTAATM_2012_MR1_1

Conditions /Comments:

NCRSelfServ 23ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: NCR6623
EPP: 5815EPP - 0090028973
Firmware version: ATM: APTRA XFS 06.xx.xx
EPP: INTL_61 - loader UL103007
Software versions:

  • Application: ACTIVATE 01.00.xx,
  • Scheme: CECS E229

Conditions /Comments:

NCRSelfServ 25ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 6625 9999
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
ATM: APTRA XFSv3 6.01.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software versions:

  • APTRA ADVANCE NDC 03.04.xx.xx
  • VISTAATM_2012_MR1_1
  • Self Service Assistant for APTRA 02.01.00
  • Security for APTRA 03.01.00
  • SM Primitives for APTRA 02.00.01

Conditions /Comments:

NCRSelfServ 26ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 6626 9999
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
ATM: APTRA XFSv3 6.01.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software versions:

  • APTRA ADVANCE NDC 03.04.xx.xx
  • Self Service Assistant for APTRA 02.01.00
  • Security for APTRA 03.01.00
  • SM Primitives for APTRA 02.00.01
  • VISTAATM_2012_MR1_1

Conditions /Comments:

NCRSelfServ 27ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: NCR6627
EPP: 5815EPP - 0090028973
Firmware version: ATM: APTRA XFS 06.xx.xx
EPP: INTL_61 - loader UL103007
Software versions:

  • Application: ACTIVATE 01.00.xx,
  • Scheme: CECS E229

Conditions /Comments:

NCRSelfServ 28ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 6628 8000
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software version: APTRA ADVANCE NDC 03.04.xx.xx
Self Service Assistant for APTRA 02.01.00
Security for APTRA 03.01.00
SM Primitives for APTRA 02.00.01

Conditions /Comments:

NCRSelfServ 31ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 6631 8604
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software version: APTRA ADVANCE NDC 03.04.xx.xx
Self Service Assistant for APTRA 02.01.00
Security for APTRA 03.01.00
SM Primitives for APTRA 02.00.01

Conditions /Comments:

NCRSelfServ 32ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 6632 2000-8605
EPP: 5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
ATM: APTRA XFSv3 6.01.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software versions:

  • APTRA ADVANCE NDC 03.04.xx.xx
  • VISTAATM_2012_MR1_1
  • Self Service Assistant for APTRA 02.01.00
  • Security for APTRA 03.01.00
  • SM Primitives for APTRA 02.00.01

Conditions /Comments:

NCRSelfServ 34ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 6634 9999
5815UEPP: 0090024379
5815EPP : 0090028973
Firmware version: ATM: APTRA XFSv03 5.00.01
ATM: APTRA XFSv 3 6.01.01
5815UEPP: INTL_20 with loader UL102007
5815EPP: INTL_61 with loader UL103007
Software versions:

  • APTRA ADVANCE NDC 03.04.xx.xx
  • VISTAATM_2012_MR1_1
  • Self Service Assistant for APTRA 02.01.00
  • Security for APTRA 03.01.00
  • SM Primitives for APTRA 02.00.01

Conditions /Comments:

NCRSelfServ 91ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: NCR6691
EPP: 5815EPP - 0090028973
Firmware version: ATM: APTRA XFS 06.xx.xx
EPP: INTL_61 - loader UL103007
Software versions:

  • Application: ACTIVATE 01.00.xx,
  • Scheme: CECS E229

Conditions /Comments:

NCRSelfServ 93ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: NCR6693
EPP: 5815EPP - 0090028973
Firmware version: ATM: APTRA XFS 06.xx.xx
EPP: INTL_61 - loader UL103007
Software versions:

  • Application: ACTIVATE 01.00.xx,
  • Scheme: CECS E229

Conditions /Comments:


Approval Expires 20/12/2020

MakeModelTypeApproval
Type
Conditions/
Comments
PAX Computer Technology (Shenzhen)Q20EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: Q20-xxx-Rx5-0xxx (w/ CTLS),br. Q20-xxx-0x5-0xxx (w/o CTLS)
Firmware version: 15.00.xx xxxx
Software version: None yet approved

Conditions /Comments:


Approval Expires 17/12/2020

MakeModelTypeApproval
Type
Conditions/
Comments
MagTekDynaPro MiniEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: 32PCIXXXzA
Firmware version: 21042034 Cxx‐PCI
21042017 Cxx‐PCI
21042038 Cxx‐PCI
21042036 Cxx‐PCI
Software version: Not Applicable


Approval Expires 16/12/2020

MakeModelTypeApproval
Type
Conditions/
Comments
AnywhereCommerceNomad 2.0EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: Nomad2.0-A2-B1
Firmware version: 020004, 4.0
Software version: Not Applicable

BBPOSWisePad W300EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: WisePad-A2-B2
Firmware version: 020004, 4.0
Software version: Not Applicable

BBPOSWisepadEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: WisePad-A2-B0
Firmware version: 020004, 4.0
Software version: Not Applicable

Thumbzup UK Limitedthumbzup Payment Pebble tCR1EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: P4.2.3
P4.2.4
Firmware version: 2.3.1
2.3.3
2.3.4
2.3.6
2.3.7
2.3.8
Software version: Not Applicable


Approval Expires 15/12/2020

MakeModelTypeApproval
Type
Conditions/
Comments
Atos Worldline SA/NVYomaniEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: 90670000xx Rev: A
90670000xx Rev: AB
90670000xx Rev: AC
Firmware version: 87.02.00
Software version: NA


Approval Expires 05/12/2020

MakeModelTypeApproval
Type
Conditions/
Comments
Wincor-NixdorfMTPT10EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: MTPT10: MTPT10PXXX1002XXX
             MTPT10PXXX0002XXX
             MTPT10PXXX1003XXX
             MTPT10PXXX0003XXX

        EPP: Cryptera - INT6220-6011 R1x
                    Cryptera - INT6220-6011 R2x
                    Cryptera - INT6220-6011 R3x
Firmware version: MTPT10: 5.XX
                                      7.XX
                           EPP: 414-0686 R3x
                                  414-0686 R4x
Software version: CBA 1.3.x.y

Conditions /Comments:

NOTE: Position "11" in the hardware version reflects the privacy filter option (0 = without privacy filter, 1 = with privacy filter).


Approval Expires 04/12/2020

MakeModelTypeApproval
Type
Conditions/
Comments
AEVI International GmbHMTPT10EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version:
MTPT10: MTPT10PXXX1002XXX
             MTPT10PXXX0002XXX
             MTPT10PXXX1003XXX
             MTPT10PXXX0003XXX
             MTPT10PXXX1004XXX
             MTPT10PXXX0004XXX

EPP: Cryptera - INT6220-6011 R1x
       Cryptera - INT6220-6011 R2x
       Cryptera - INT6220-6011 R3x

Firmware version: MTPT10: 5.XX
             7.XX
             11.XX
EPP: 414-0686 R3x
       414-0686 R4x
       414-0686 R5x

Software versions:

  • CBA 1.3.x.y
  • CBA 2.x.y

Conditions /Comments:

NOTE: Position "11" in the hardware version reflects the privacy filter option (0 = without privacy filter, 1 = with privacy filter)

IngenicoIPP3xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: IPP3xx-11Txxxxx
Firmware version: 820305 V02.xx, Scheme version: 820365 V02.xx
Software versions:

  • TSA v1.05
  • TSA v1.07
  • TSA v1.10
  • TSA v1.11

Conditions /Comments:


Approval Expires 28/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoMove/2500EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: MOV25AC MOV25EC - without contactless, without PIN shield
MOV25BC MOV25FC - with contactless, without PIN shield
MOV25CC MOV25GC - without contactless, with PIN shield
MOV25DC MOV25HC - with contactless, with PIN shield
Firmware version: 820547v01.xx
820376v01.xx
820548v01.xx
820549v01.xx SRED optional
820548v02.xx Open Protocol support optional

Conditions /Comments:


Approval Expires 20/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
KALRTM 3010EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: A1 with EPP: JUST E6060
Firmware version: EPP: 3515
Software version: Kalignite Software Platform 4.0 K3A 4.2

Conditions /Comments:

KALRTM 3012EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: A1 with EPP: JUST E6060
Firmware version: EPP: 3515
Software version: Kalignite Software Platform 4.0 K3A 4.2

Conditions /Comments:


Approval Expires 18/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
LipmanNurit 8100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 8100-cc-Mxx-yyy-C02
Firmware version: NOS7-SPED_FW versions 2.1, 2.2 and 2.3
Software version: PPC1_02_0103_A

Conditions /Comments:

VeriFoneNurit 8100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 8100-cc-Mxx-yyy-C02
Firmware version: NOS7-SPED_FW versions 2.1, 2.2 and 2.3
Software version: PPC1_02_0103_A

Conditions /Comments:

VeriFoneSC5000EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M108-42x-yx and M108-43x-yx (y=3,4,5)
Firmware version: RM OS 4.01
Software version: APCA 0001

Conditions /Comments:

VeriFoneSC5000EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M108-42x-yx and M108-43x-yx (y=3,4,5)
Firmware version: RM OS 4.01
Software versions:

  • SoftPay Base 3.0:Pulse 1.2.xx, using security script PULH0001
  • SC5x 1.169 1202 using security script AS2805

Conditions /Comments:

VeriFoneSC5000EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M108-42x-yx and M108-43x-yx (y=3,4,5)
Firmware version: RM OS 4.01
Software versions:

  • 1.1.xx, using security script BBLSPS01
  • 1.1.xx, using security script FDI_0001
VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-0x-AUx
Firmware version: QA0008A4
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software versions:

  • CitiPOS 1.14 with security script P3Crypto 1.12
  • PAYware POS Bendigo application version 2.3.xx
  • PAYware POS Bendigo application version 3.3.xx security script BBLSPS01

Conditions /Comments:

VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-0x-AUx
Firmware version: QA0005A3
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software versions:

  • SoftPay Base 3.0:Pulse 4.2.xx,using security scripts PULH0001 and PULH0001b
  • PAYware POS Bendigo application version 2.3.xx

Conditions /Comments:

VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-0x-AUx
Firmware version: QA0005A3
QA0008A4
QA0010A0
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software version: V2.5f Release Pack 9, using security script CRYPT001

Conditions /Comments:

VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-0x-AUx
Firmware version: QA0005A3
QA0008A4
QA0010A0
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software versions:

  • CitiPOS 1.14 with security script P3Crypto 1.12
  • SoftPay Base 3.0:Pulse 3.1.xx,using security scripts PULH0001 and PULH0001b
  • SoftPay Base 3.0:Pulse 4.1.xx,using security scripts PULH0001 and PULH0001b
  • SoftPay Base 3.0:Pulse 4.2.xx,using security scripts PULH0001 and PULH0001b
  • PAYware POS Travelex version 5.2.xx,using security scripts PULH0001 and PULH0001b
  • PAYware POS Bendigo application version 3.3.x security script BBLSPS01

Conditions /Comments:

VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-0x-AUx
Firmware version: QA0005A3
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software versions:

  • APCA 0001
  • PAYware POS Bendigo application version 2.3.xx
  • PAYware POS Bendigo application version 3.3.xx security script BBLSPS01

Conditions /Comments:

VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M251-5xx-0x-AUx
Firmware version: QA0005A3
QA0010A1
QA0011A0
QA0011A1
QA0011A2
QA0011A3
QA0011A4
QA0012A0
QA0012A1
QA0012A2
Software versions:

  • SoftPay Base 3.0:Pulse 4.1.xx,using security scripts PULH0001 and PULH0001b
  • PAYware POS Bendigo application version 2.3.xx
  • PAYware POS Bendigo application version 3.3.x security script BBLSPS01

Conditions /Comments:

VeriFoneVX610EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: M256-5xx-0x-NZ/AUx
Firmware version: QB0106A2
Software version: APCA 0001

Conditions /Comments:

VeriFoneVX610EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M256-5xx-0x-NZ/AUx
Firmware version: QB0108A4
Software version: SoftPay Base 2.20 Version 1.2.xx, using security script BBLSPS01


Approval Expires 17/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
Neo ICP KoreacashPod 60xxAATM DEVICES - SERIES 2

Hardware version: Rev MP2.2, EPP Hardware Versions: V1.4 and V1.4a
Firmware version: ATM Firmware Version: Security v1.0, EPP Firmware Version: P7a
Software version: NT-0100.xx

Neo ICP KoreacashPod 60xxAATM DEVICES - SERIES 2

Hardware version: Rev MP2.2
Firmware version: ATM Firmware Version: Security v1.0, EPP Firmware Version: P7
Software version: NT-0100.xx

Neo ICP KoreacashPod 60xxCVATM DEVICES - SERIES 2

Hardware version: EPP: V1.4x
ATM: Security v1.x1
Firmware version: EPP: P7a
ATM: Security v1.x1
Software version: Security v1.x1

Neo ICP KoreacashPod 60xxRATM DEVICES - SERIES 2

Hardware version: EPP: V1.4x
ATM: Security v1.x1
Firmware version: EPP: P7a
ATM: Security v1.x1
Software version: Nt-020x.xx 2

NeoICP KoreacashPod 60xxAATM DEVICES - SERIES 2

Hardware version: ATM Hardware Version: VB 7007 Rev.A EPP Hardware Version: V1.4x
Firmware version: ATM Firmware Version: Security v1.0 EPP Firmware Version: P7a
Software version: NT-0200.xx

NeoICP KoreacashPod 60xxSATM DEVICES - SERIES 2

Hardware version: ATM Hardware Version: VB 7007 Rev.A EPP Hardware Version: V1.4x
Firmware version: ATM Firmware Version: Security v1.0 EPP Firmware Version: P7a
Software version: NT-0200.xx

SemtekDCR7x00-100REFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 100R
Firmware version: 2.1

Conditions /Comments:


Approval Expires 16/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
MiuraM007 ShuttleEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M007-PRODxx-V1-x
Firmware version: M000-OS-V7-x
Software versions:

  • MPI: M000-MPI-V2-x..
  • MPI:M000-MPI-V3-x

Approval Expires 13/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
MiuraM010 ShuttleEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M010-PRODxx-V2-x
Firmware version: M000-OS-V7-x
Software versions:

  • MPI: M000-MPI-V2-x.
  • MPI:M000-MPI-V3-x

Approval Expires 08/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
BBPOSWisepad 2 PlusEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: WPP2XXXX-XX-XXX
Firmware version: WPP20.003-20
Software version: Not Applicable


Approval Expires 02/11/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFonee285EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: H445-07-30-0xx-00-B0 (BT/WiFi)
H445-07-38-0xx-00-B0 (3G/BT/WiFi)
Firmware version: VAULT: 6.x.x
AppM: 10.x.x
VFSRED: 7.x.x
VFOP: 1.x.x
Software version: Adyen 1.xx.xx


Approval Expires 21/10/2020

MakeModelTypeApproval
Type
Conditions/
Comments
HypercomM2100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: F32510
Firmware version: SSM FW058 020 SC&K Booter: FU071 035 or FU071 040 Booter - FU065 020 Application Manager: FU800 024
Software version: FW500 021

Conditions /Comments:

HypercomT2100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: F32510
Firmware version: SSM FW058 020 SC&K Booter: FU071 035 or FU071 040 Booter - FU065 020 Application Manager: FU800 024
Software version: FW500 021

Conditions /Comments:

VeriFoneM2100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: F32510
Firmware version: SSM FW058 020 SC&K Booter: FU071 035 or FU071 040 Booter - FU065 020 Application Manager: FU800 024
Software version: FW500 021

Conditions /Comments:

VeriFoneT2100EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: F32510
Firmware version: SSM FW058 020 SC&K Booter: FU071 035 or FU071 040 Booter - FU065 020 Application Manager: FU800 024
Software version: FW500 021

Conditions /Comments:


Approval Expires 14/10/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoIWL2xxEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: IWL2xx-01Txxxxx
Firmware version: 820305 V01.xx, Scheme version: 820365 V02.xx.
Software versions:

  • TSA v1.05
  • TSA v1.07
  • TSA v1.10
IngenicoIWL2xxEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: IWL2xx-01Txxxxx
Firmware version: 820305 V01.xx, Scheme version: 820365 V02.xx.
Software versions:

  • Payment app: ANZ v9.39

  • Payment app: Coles v9.00

  • Middleware app: TSA v1.12

Approval Expires 13/10/2020

MakeModelTypeApproval
Type
Conditions/
Comments
MiuraM006 ShuttleEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M006-PRODxx-V2-x
Firmware version: M000-OS-V7-x
Software versions:

  • MPI: M000-MPI-V2-x.
  • MPI:M000-MPI-V3-x

Approval Expires 09/10/2020

MakeModelTypeApproval
Type
Conditions/
Comments
DPS: Direct Payment SolutionsSKP200E & SCR200EUNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: PIN Pad Display: SKP200E: Release C
Secure Card Reader: SCR200E: Release B
Firmware version: PIN Pad Display: DPSSKP200E v1.3xx
Secure Card Reader: SRC200E v1.3.x.x
Software version: NA

Conditions /Comments:

Each of these components may be deployed in combination with the complementing component of the listed SKP200 & SCR200 UPT.

Payment Express LimitedSKP200E & SCR200EUNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: PIN Pad Display: SKP200E: Release C
Secure Card Reader: SCR200E: Release B
Firmware version: PIN Pad Display: DPSSKP200E v1.3xx
Secure Card Reader: SRC200E v1.3.x.x
Software version: NA

Conditions /Comments:

Each of these components may be deployed in combination with the complementing component of the listed SKP200 & SCR200 UPT.


Approval Expires 04/10/2020

MakeModelTypeApproval
Type
Conditions/
Comments
NewlandN900EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: N9_00_xx_01_xx (w/o CTLS, BT or WIFI)
N9_01_xx_01_xx (with CTLS, BT & WIFI)
N9_06_xx_01_xx (w/o CTLS, with BT & WIFI)
N9_07_xx_01_xx (with CTLS, w/o BT or WIFI)
N9_00_xx_02_xx (w/o CTLS, BT or WF)
N9_01_xx_02_xx (with CTLS, BT & WIFI)
N9_06_xx_02_xx (w/o CTLS, with BT & WIFI)
N9_07_xx_02_xx (with CTLS, w/o BT or WIFI)
Firmware version: 01_02_xx_xxxxxxxxxx
02_01_xx_xxxxxxxxxx
Software version: N/A

Conditions /Comments:


Approval Expires 23/09/2020

MakeModelTypeApproval
Type
Conditions/
Comments
DioneSecura PEDEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: XLPP001 Issue 4 Serial 00295206
Firmware version: 6.55
Software versions:

  • V1.05
  • V1.07

Conditions /Comments:

DioneSecura PEDEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: XLPP001 Issue 4 Serial 00295206
Firmware version: 6.55
Software version: V1.44

Conditions /Comments:

DioneXplorer PEDEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: XPLR005 Issue 6 Serial 00756794
Firmware version: 6.55
Software version: V1.44

Conditions /Comments:

VeriFoneSecura PEDEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: XLPP001 Issue 4 Serial 00295206
Firmware version: 6.55
Software versions:

  • V1.05
  • V1.07

Conditions /Comments:

VeriFoneSecura PEDEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: XLPP001 Issue 4 Serial 00295206
Firmware version: 6.55
Software version: V1.44

Conditions /Comments:

VeriFoneXplorer PEDEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: XPLR005 Issue 6 Serial 00756794
Firmware version: 6.55
Software version: V1.44

Conditions /Comments:


Approval Expires 19/09/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneV400mEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H475-07-38-xxx-x1-B0 (V400m Plus 3G)
H475-07-70-xxx-x1-B0 (V400m Plus 4G)
Firmware version: VAULT: 6.x.x; 7.x.x; 8.x.x
AppM: 10.x.x; 11.x.x; 12.x.x
VFSRED: 7.x.x; 9.x.x
VFOP: 1.x.x
Software version: Adyen 1.xx.xx

Conditions /Comments:


Approval Expires 16/09/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoiSC Touch 480EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iSC4xx-xxTxxxxx
Firmware version: 820518 V11.xx (base firmware)
820518 V12.xx (base firmware)
820365V02.xx (key schemes)
820073V01.xx (Open Protocol module)
820528V02.xx (SRED module)
Software versions:

  • Payment Application: ANZ 9.39
  • Payment Application: Coles 9.00
  • Middleware App: TSA Version 1.12
  • Middleware App: TSA Version 1.10

Conditions /Comments:


Approval Expires 14/09/2020

MakeModelTypeApproval
Type
Conditions/
Comments
ThalesPayshield 9000 with PayShield Remote ManagerSECURITY CONTROL MODULES - SERIES 2 Yes (click)

Hardware version: 1600A466.01.X.X.X.X.X.X
1600B466.01.X.X.X.X.X.X
1600A466.04.X.X.X.X.X.X
1600B466.04.X.X.X.X.X.X
1600D466.04.X.X.X.X.X.X
1600A466.05.X.X.X.X.X.X
1600B466.05.X.X.X.X.X.X
1600D466.05.X.X.X.X.X.X
1600A466.06.X.X.X.X.X.X
1600B466.06.X.X.X.X.X.X
1600D466.06.X.X.X.X.X.X
Firmware version: 1317-1900 (Version 1.2a)
1346-1905 (Version 2.1c)
1346-x9xx (Version 2.1c)
1346-x9xx (Version 2.3c) including PCI HSM Compliance Mode BootManager Versions: 1.16.12, 1.16.
1346-1907 (Version 2.1d) including BootManager Versions: 1.16.12, 1.16.8
1407-0902 (Version 3.1a) including: Bootstrap Version: 1.10.2 BootManager Versions: 1.16.8, 1.16.12, 1.18.2
Software version: Remote Manager Software Version : Payshield Manager 5.x.x

Conditions /Comments:


Approval Expires 08/09/2020

MakeModelTypeApproval
Type
Conditions/
Comments
ThalesPayshield 9000SECURITY CONTROL MODULES - SERIES 2

Hardware version: 1600A466.01.X.X.X.X.X.X
1600B466.01.X.X.X.X.X.X
1600A466.04.X.X.X.X.X.X
1600B466.04.X.X.X.X.X.X
1600D466.04.X.X.X.X.X.X
1600A466.05.X.X.X.X.X.X
1600B466.05.X.X.X.X.X.X
1600D466.05.X.X.X.X.X.X
1600A466.06.X.X.X.X.X.X
1600B466.06.X.X.X.X.X.X
1600D466.06.X.X.X.X.X.X
Firmware version: 1317-1900 (Version 1.2a)
1346-1905 (Version 2.1c)
1346-x9xx (Version 2.1c)
1346-1907 (Version 2.1d) including BootManager Versions: 1.16.12, 1.16.8
1346-x9xx (Version 2.3c) including PCI HSM Compliance Mode BootManager Versions: 1.16.12, 1.16.8
1346-0919 (Version 2.4a) including Bootstrap version: 1.10.2 and Boot Manager Versions: 1.16.12, 1.16.8,1.18.2
1346-0921 (Version 2.4b) including Bootstrap Version: 1.10.2 and Boot Manager Version: 1.18.2
1407-0908 (Version 3.2c) including Bootstrap Version, BootManager Version, payShield Manager
1407-1905 (Version 3.1d) including BootManager, Approved Boot Manager Versions:1.10.2, 1.18.2
1407-1911 (Version 3.3b) including Bootstrap, BootManager, payShield Manager
Software versions:

  • Thales Remote HSM Manager "Live-CD" Version = 4.x.x (Linux boot CD)
  • HSM Manager 5.x.x

Approval Expires 03/09/2020

MakeModelTypeApproval
Type
Conditions/
Comments
TritonRL2000ATM DEVICES - SERIES 2

Hardware version: ATM: RL23XY (Where X is 1 or 2 and Y is 3, 4, 5 or 8)
EPP: Cryptera T9 (xxx1212-56xx)
Firmware version: ATM: Windows CE 5.0
EPP: 414-0702 R1x with loader 4141-0599 R1x
Software version: Triton CE Application 3.3.2

TritonRL5000ATM DEVICES - SERIES 2

Hardware version: ATM: RL5WXY (W is 1 or 2; X is 1 or 2; Y is 4, 5 or 8)
EPP: Cryptera T9 (xxx1212-56xx)
Firmware version: ATM: Windows CE 5.0
EPP: 414-0702 R1x with loader 414-0599R1x
Software version: Triton CE application 3.3.2


Approval Expires 01/09/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoiSMP4EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: IMP6xx-01Txxxxx (No CTLS)
IMP6xx-11Txxxxx (CTLS)
IMP6xx-02Txxxxx (No CTLS)
IMP6xx-12Txxxxx (CTLS)
Firmware version: 820305v11.xx (base firmware)
820365v02.xx (key schemes)
820073v02.xx (Open Protocol module)
820528v02.xx (SRED module)
Software versions:

  • Payment application: Coles v9.00
  • Middleware app: TSA v1.12

Conditions /Comments:


Approval Expires 30/08/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneM400EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H405-07-x0-xx0-00-B0
Firmware version: Vault: 5.x.x.x;
AppM: 10.x.x.x;
SRED: 5.x.x;
OP: 1.x.x
Software versions:

  • Aust Post: 05.03.xx
  • Adyen 1.xx.xx

Conditions /Comments:


Approval Expires 24/08/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneV240mEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: H474-07-xx-xxx-xx-B0
Firmware version: Vault: 6.x.x;
AppM: 10.x.x;
VFSRED: 7.x.x.xxx;
VFOP: 1.x.x

Software version: N/A

Conditions /Comments:


Approval Expires 22/08/2020

MakeModelTypeApproval
Type
Conditions/
Comments
ROAM DataMOBY 8500EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: MOB85AAx (No CTLS)
MOB85BAx (CTLS)
Firmware version: Boot: xxxx-F-701-01xx-xxxx-xx
Ctrl: xxxx-F-702-01xx-xxxx-xx
Software version: No application yet submitted

Conditions /Comments:


Approval Expires 21/08/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneV200cEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: V200c - H420-03-03-XXX-X0-A2
V200c CTLS - H420-07-03-XXX-X0-A2
V200c Plus - H420-07-33-XXX-X1-A2
Firmware version: VAULT: 3.x.x
VAULT: 4.x.x
AppM: 8.x.x
AppM: 9.x.x
VFSRED: 5.x.x
VFOP: 1.x.x

Software version: no payment application yet approved

Conditions /Comments:

.


Approval Expires 12/08/2020

MakeModelTypeApproval
Type
Conditions/
Comments
Atos WorldlineC-ZAM/XENTAEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 90640000 02
906400000x REV_J, REV_Jx
906400000x REV_K, REV_Kx
906400000x REV_L, REV_Lx

Firmware version: 87.01.10
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:

Atos WorldlineXENTISSIMOEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 906600000x
906600000x REV_E, REV_Ex
906600000x REV_F, REV_Fx
906600000x REV_G, REV_Gx
Firmware version: 87.01.10
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:

CadmusCP04EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 7xx-1.00yy
Firmware version: 1.18.zz

Usage Comments:

Deployment of the device will require the development and approval of proprietary SCM functions

KeyCorpK230GEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: EFT930x-xxxx0101
Firmware version: V01.01
Software version: v2.7x

KeyCorpK230EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: K230-xxxx-xxx
Firmware version: V01.01
Software version: v2.7x


Approval Expires 06/08/2020

MakeModelTypeApproval
Type
Conditions/
Comments
KeyCorpArtema K800ENCRYPTING PIN PADS - SERIES 2 Yes (click)

Hardware version: P950-3xxy
Firmware version: K800_APU_SF_SP0001_MFxxxx
Software version: n/a

Conditions /Comments:


Approval Expires 30/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneUX100UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: UX100 (EPP): M159-10x-xx-xxx
UX100 (EPP): M159-10x-xx-xxx Rev Bxx
UX100 (EPP): M159-10x-xx-xxx Rev Cxx

UX300 (SCR): M159-30x-xxx-xxx
UX300 (SCR): M159-30x-xxx-xxx-B
UX301 (SRC): M159-30x-xxx-xxx
Firmware version:
UX100 (EPP): FWUX 01.05.xx
UX100 (EPP): FWUX 01.06.xx
UX300 (SCR) & UX301 (SRC) :
Vault 4.x.x, 7.x.x
OP 4.x.x, 5.x.x
SRED 4.x.x
AppManager 4.x.x

Software version: Not Applicable

Conditions /Comments:

Usage Comments:

VeriFoneUX110UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: UX110 (EPP): M159-11x-xx-xxx
UX110 (EPP): M159-11x-xx-xxx Rev Bxx
UX110 (EPP): M159-11X-XX-XXX Rev CXX

UX300 (SCR): M159-30x-xxx-xxx
UX300 (SCR): M159-30x-xxx-xxx-B
UX301 (SCR): M159-301-xxx-xxx
UX301 (SCR): M159-301-xxx-xxx-Rev Bxx
Firmware version:
UX110 (EPP): FWUX 01.05.xx
UX110 (EPP): FWUX 01.06.xx
UX300/UX301 (SCR):
Vault 4.x.x, 7.x.x, 7A.x.x, 12.x.x.
OP 4.x.x, 5.x.x, 7.x.x
SRED 4.x.x, 5.x.x
AppManager 4.x.x,4A.x.x, 6.x.x

Software version: Not applicable

Conditions /Comments:

This device must be used with an approved secure display

VeriFoneUX300UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: SRC: UX300: M159-30x-xxx-xxx
SRC: UX300: M159-30x-xxx-xxx-B

UX100 (EPP): M159-10x-xx-xxx
UX100 (EPP): M159-10x-xx-xxx Rev Bxx
UX100 (EPP): M159-10x-xx-xxx Rev Cxx

UX110 (EPP): M159-11x-xx-xxx
UX110 (EPP): M159-11x-xx-xxx Rev Bxx
UX110 (EPP): M159-11x-xx-xxx Rev Cxx

Firmware version:
UX3100 (SCR):
Vault 4.x.x, 7.x.x, 7A.x.x, 12.x.x
OP 4.x.x, 5.x.x, 7.x.x
SRED 4.x.x, 5.x.x
AppManager 4.x.x, 4A.x.x, 6.x.x

UC110 (EPP): FWUX 01.05.xx, FWUX 01.06.xx

Software version: Cabcharge 690006xx

Conditions /Comments:

UX110 (EPP): See entry for UX110 for additional condition
A) Optionally either the UX400 or UX401, non-security relevant analogue antenna components of the UPT may be used.

Usage Comments:

VeriFoneUX301UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: SRC: UX301: M159-301-xxx-xxx
SRC: UX301: M159-301-xxx-xxx Rev Bxx

EPP: UX100: M159-10x-xx-xxx
EPP: UX100: M159-10x-xx-xxx Rev Bxx
EPP: UX110: M159-11x-xx-xxx
EPP: UX110: M159-11x-xx-xxx Rev Bxx
EPP: UX110 : M159-11x-xx-xxx Rev Cxx
Firmware version:
SCR: UX301:
Vault 4.x.x, 7.x.x, 7A.x.x, 12.x.x
OP 4.x.x, 5.x.x, 7.x.x
SRED 4.x.x, 5.x.x
AppManager 4.x.x, 4A.x.x, 6.x.x

EPP: UX100: FWUX 01.05.xx

Software version: Cabcharge 690006xx

Conditions /Comments:

Usage Comments:


Approval Expires 26/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoLink/2500EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: LIN25AA, (no CTLS)
LIN25BA, (CTLS)
LIN25CA, (no CTLS)
LIN25DA, (CTLS)
Firmware version: 820547v01.xx (base firmware)
820376V01.xx (key schemes)
820549v01.xx (Open Protocols)
820548v02.xx (SRED)
Software version: Not Yet Approved

Conditions /Comments:

GilbarcoSPOT M3cUNATTENDED PAYMENT TERMINALS - SERIES 2

Hardware version: Display: SPOT M3c Display Rev.B
Keyboard: GVR SPOT Keypad Unit 2.0 Rev.B
Card Reader: Panasonic Reader (manual, with MSR data protection)
Firmware version: OS 01.03, PIN Pad 01.05, PIN Pad 01.07
Software versions:

  • AS2805 01.01 (Single Acquirer)
  • AS2805 02.00 (Dual-Acquirer)

Approval Expires 24/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
QuestSWIFT PTEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 800-0012-04-Sxxxxxx; 800-0012-05-SxxxxxA
Firmware version: 03.xx.yy
Software version: n/a

Conditions /Comments:


Approval Expires 12/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
PAX Computer Technology (Shenzhen)S900EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: S900-xxx-xx4-0xxx
Firmware version: 14.00.xx xxxx
14.01.xx xxxx (S900 4-30204)
14.02.xx xxxx
Software version: None Yet Approved

Conditions /Comments:

PAX Computer Technology (Shenzhen)S920LEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: S920-xxx-xx4-1xxx
Firmware version: Prolin OS: 14.00.xx
Prolin Boot: 2.0.x (S920 4-30159)
14.02.xx xxxx
Software version: None Yet Approved

Conditions /Comments:

PAX Computer Technology (Shenzhen)S920EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: S920-xxx-xx4-0xxx
Firmware version: Prolin OS: 14.00.xx
Prolin Boot: 2.0.x (S920 4-30159)
14.02.xx.xxxx
Software version: None yet Approved

Conditions /Comments:


Approval Expires 10/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoI3070 ContactlessEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: I3070MPLU40A I3070MP03
Firmware version: Unicapt 32.2.x.x
Software versions:

  • SSA 00.27,
  • SSA 00.28,
  • SSA 00.29,
  • SSA 00.39,
  • SSA 00.41,
  • SSA 00.44,
  • SSA 00.50
IngenicoI8550EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: I8550MH10
Firmware version: Unicapt 32.2.x.x
Software versions:

  • API SSA 00.27
  • API SSA 00.28
  • API SSA 00.29
  • API SSA 00.32
  • API SSA 00.33
  • API SSA 00.39

Approval Expires 04/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
PAX Computer Technology (Shenzhen)A920EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: A920-xxx-xx4-0xxx
A920-xxx-0x5-0xxx
A920-xxx-Rx5-0xxx
Firmware version: 24.00.xxxx
24.01.xxxx
25.00.xxxx
25.01.xxxx
Software version: None Yet Approved

Conditions /Comments:


Approval Expires 02/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
DieboldOpteva 522ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: Opteva 522
EPP: EPP7 = Cryptera A/S 1316-57xx
Firmware version: ATM: XFSv4.0.15.1.xx, XFSv3.11
EPP: 414-2020 R1B
Software version: Agilis 3.0 91x
Agilis 3.0 NDx (XFS 4.0)
Agilis 2.4 91x

Usage Comments:

All devices deployed in Australia must use a UL437 graded lock (e.g ABLOY CL200N etc).
The Operating System must be configured to use only secure cipher suites for TLS/SSL and a certified random number generator.

DieboldOpteva 760ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: Opteva 760
EPP: EPP7 = Cryptera A/S 1316-57xx
Firmware version: ATM: XFSv4.0.15.1.xx, XFSv3.11
EPP: 414-2020 R1B
Software version: Agilis 3.0 91x
Agilis 3.0 NDx (XFS 4.0)
Agilis 2.4 91x

Conditions /Comments:

Usage Comments:

All devices deployed in Australia must use a UL437 graded lock (e.g ABLOY CL200N etc).
The Operating System must be configured to use only secure cipher suites for TLS/SSL and a certified random number generator.

DieboldOpteva 828ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: Opteva 828
EPP: EPP7 = Cryptera A/S 1316-57xx
Firmware version: ATM: XFSv4.0.15.1.xx, XFSv3.11
EPP: 414-2020 R1B
Software version: Agilis 3.0 91x (XF4.0 + XFS4.1)
Agilis 3.0 NDx (XFS 4.0 + XFS4.1)

Conditions /Comments:

Usage Comments:

All devices deployed in Australia must use a UL437 graded lock (e.g ABLOY CL200N etc).
The Operating System must be configured to use only secure cipher suites for TLS/SSL and a certified random number generator.

DieboldOpteva 868ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: Opteva 868
EPP: EPP7 = Cryptera A/S 1316-57xx
Firmware version: ATM: XFSv4.0.15.1.xx, XFSv3.11
EPP: 414-2020 R1B
Software version: Agilis 3.0 91x (XF4.0 + XFS4.1)
Agilis 3.0 NDx (XFS 4.0 + XFS4.1)

Conditions /Comments:

Usage Comments:

All devices deployed in Australia must use a UL437 graded lock (e.g ABLOY CL200N etc)
The Operating System must be configured to use only secure cipher suites for TLS/SSL and a certified random number generator.


Approval Expires 01/07/2020

MakeModelTypeApproval
Type
Conditions/
Comments
HypercomM42xxEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: 010341-00XR
060001-060015
Firmware version: AM v2.0 20080402
AM v5.0 xxxxxxxx
Software version: Suncorp version 1.0.6
HICAPS version 01A
Westpac Application WSBX42.119
HICAPS version H4G

VeriFoneM42xxEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: 010341-00XR
060001-060015
Firmware version: AM v2.0 20080402
AM v5.0 xxxxxxxx
Software version: Suncorp version 1.0.6
HICAPS version 01A
Westpac Application WSBX42.119
HICAPS version H4G


Approval Expires 26/06/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneX10EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: SUB179-xx1-01-A
Firmware version: Vault:2.x.x;
AppM: 7.x.x;
VFSRED: 5.x.x
VFOP: 1.x.x
Software version: None yet approved

Conditions /Comments:


Approval Expires 25/06/2020

MakeModelTypeApproval
Type
Conditions/
Comments
CrypteraINT1212ENCRYPTING PIN PADS - SERIES 2

Hardware version: xxx1212-56xx R1x
Firmware version: 414-0702 R1x with loader 414-0387 R2Y
Software version: Not Applicable


Approval Expires 19/06/2020

MakeModelTypeApproval
Type
Conditions/
Comments
VeriFoneVx810EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M281-xxx-xx-Rx

Firmware version: QG0009A0
QG0009A1
QG0009A2
QG0009A3
QG0009A4
QG0011A0
QG0011A1
QG0012A1
QG0012A2
Software versions:

  • security script: APCA 0001
  • PAYware POS MBL Version 1.5.xx: security script MBL_0002
  • PINpad AS2805 Application v1.1.xx: script APCA0002
  • FPOZ 3.x.xx: security script CRYPT001
  • PINpad Caltex 1.1.xx using security script APCA0003
  • Travelex 5.2.xx
  • PAYware POS Bendigo 2.3.xx
  • PINPad Caltex 2.1.xx: security script APCA0003
  • PAYware POS Bendigo V3.3.xx: Security Script BBLSPS01
VeriFoneVx810EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: M281-xxx-xx-AUx
Firmware version: QG0009A0, QG0009A1, QG0009A2, QG0009A3, QG0009A4, QG0011A0, QG0011A1, QG0012A1,QG0012A2
Software versions:

  • security script: APCA 0001
  • PAYware POS MBL Version 1.5.xx, using security script MBL_0002
  • PINpad AS2805 Application v1.1.xx using security script APCA0002
  • FPOZ 3.x.xx using security script CRYPT001
  • PINpad Caltex 1.1.xx using security script APCA0003
  • Travelex 5.2.xx
  • PAYware POS Bendigo 2.3.xx
  • PINpad Caltex 2.1.xx using security script APCA0003

Approval Expires 10/06/2020

MakeModelTypeApproval
Type
Conditions/
Comments
DieboldOpteva 562ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: Opteva 562
EPP: EPP7 = Cryptera A/S 1316-57xx
Firmware version: ATM: XFSv4.0.15.1.xx, XFSv3.11
EPP: 414-2020 R1B
Software version: Agilis 3.0 91x (XF4.0)
Agilis 3.0 NDx (XFS 4.0)
Agilis 2.4 91x (XFS 3.11)

Usage Comments:

All devices deployed in Australia must use a UL437 graded lock (e.g ABLOY CL200N etc).
The Operating System must be configured to use only secure cipher suites for TLS/SSL and a certified random number generator.

TritonArgoATM DEVICES - SERIES 2

Hardware version: ATM: RL63XY*, RL27XY*, RL17XY* (X is 1 or 2 and Y is 3, 4, 5, B or D)
EPP: Cryptera INT 1217-5410-R1x
     : Cryptera INT1212: xxx1212-56xxR1x
Firmware version: ATM OS: Windows CE 5.0
EPP: 414-0639 R1x with loader 414-0387 R2Y
     : 414-0702 R1x with loader 4140599 R1x
Software versions:

  • ATM: Triton CE application 3.3.1
  •       : Triton CE application 3.3.2

Approval Expires 07/06/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IngenicoiPP310EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iPP3xx-21Txxxxx
iPP3xx-31Txxxxx
iPP3xx-41Txxxxx
iPP3xx-51Txxxxx
Firmware version: 820305 V11.xx
820180 V01.xx 3
820365 V02.xx (key schemes)
820073 V01.xx (Open Protocol module)
820528 V02.xx (SRED module)
Software versions:

  • Payment Application: Coles v9.00
  • Middleware app: TSA v1.12

Conditions /Comments:

Usage Comments:

Note: This device MUST NOT be used as a PIN PAD connected to any other device.

IngenicoiPP315EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iPP3xx-21Txxxxx
iPP3xx-31Txxxxx
iPP3xx-41Txxxxx
iPP3xx-51Txxxxx
Firmware version: 820305 V11.xx
820180 V01.xx 3
820365 V02.xx (key schemes)
820073 V01.xx (Open Protocol module)
820528 V02.xx (SRED module)
Software versions:

  • Payment applicatuon: Coles V9.00
  • Middleware app: TSA v1.12

Conditions /Comments:

Usage Comments:

Note: This device MUST NOT be used as a PIN PAD connected to any other device.

IngenicoiPP320EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iPP3xx-21Txxxxx
iPP3xx-31Txxxxx
iPP3xx-41Txxxxx
iPP3xx-51Txxxxx
Firmware version: 820305 V11.xx
820180 V01.xx 3
820365 V02.xx (key schemes)
820073 V01.xx (Open Protocol module)
820528 V02.xx (SRED module)
Software versions:

  • Payment application: Coles v9.00
  • Middleware app: TSA v1.12

Conditions /Comments:

Usage Comments:

Note: This device MUST NOT be used as a PIN PAD connected to any other device.

IngenicoiPP350EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: iPP3xx-21Txxxxx
iPP3xx-31Txxxxx
iPP3xx-41Txxxxx
iPP3xx-51Txxxxx
Firmware version: 820305 V11.xx
820180 V01.xx 3
820365 V02.xx (key schemes)
820073 V01.xx (Open Protocol module)
820528 V02.xx (SRED module)
Software versions:

  • Payment application: Coles v9.00
  • Middleware app: TSA v1.12

Conditions /Comments:

Usage Comments:

Note: This device MUST NOT be used as a PIN PAD connected to any other device.


Approval Expires 28/05/2020

MakeModelTypeApproval
Type
Conditions/
Comments
BBPOSWisepad 2EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: WPX2XXXX-XX-XXX
Firmware version: WPX20.003-12
Software version: Not Applicable

QuestUT430UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

Hardware version: 800-0050-0X
800-0050-1x
Firmware version: 05.xx.xy
06.xx.yy
07.xx.yy
Software version: N.A.

Usage Comments:

PIN shielding depends on the design of the vending machine following the vendor’s (Quest’s) specific design recommendations detailed in the UT430 Installation guide [section “recommendation for PIN entry privacy” of InstGuide]


Approval Expires 22/05/2020

MakeModelTypeApproval
Type
Conditions/
Comments
Atos WorldlineXENTAEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 90640000 02
906400000x REV_J, REV_Jx
906400000x REV_K, REV_Kx
906400000x REV_L, REV_Lx

Firmware version: 87.01.12
87.01.12
87.02.00
Software version: N/A

Conditions /Comments:

CASC200EFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: C200-V4.00
Firmware version: V1.1.1
Software version: CasEPOS v1.0.22


Approval Expires 21/05/2020

MakeModelTypeApproval
Type
Conditions/
Comments
Diebold3700ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 3700
EPP: EPP& - AUS1316-57xx
Firmware version: ATM: XFSv6.0.x
Scheme: IAC 7/2015
EPP: 414-2020
Software version: None as yet approved

Conditions /Comments:

Diebold3750ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 3750
EPP: EPP7 - AUS1316-57xx
Firmware version: ATM: XFSv6.0.x
Scheme: IAC 7/2015
EPP: 414-2020
Software version: None as yet approved

Conditions /Comments:

Diebold5550ATM DEVICES - SERIES 2 Yes (click)

Hardware version: ATM: 5550
EPP: EPP7 -AUS1316-57xx
Firmware version: ATM: XFSv6.0.x Scheme: IAC 7/2015Software version: None as yet approved

Conditions /Comments:


Approval Expires 01/05/2020

MakeModelTypeApproval
Type
Conditions/
Comments
IntellectFORTE-PPEFTPOS PIN ENTRY DEVICES - SERIES 2

Hardware version: FORTE 310 - xyzu-cc
Firmware version: ISC-FORTE 1 FW V2.0.2.0
Software version: N/A

SagemP30EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 04343PT20002088
Firmware version: 820053V01.03, security scheme version: 0104

Conditions /Comments:


Approval Expires 28/04/2020

MakeModelTypeApproval
Type
Conditions/
Comments
QuestDUO POS/PEDEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

Hardware version: 800-888x-0x
Firmware version: 04.XX.YY
Software version: Not Applicable

Conditions /Comments:


Approval Expires 23/04/2020

MakeModelTypeApproval
Type
Conditions/
Comments
Wincor-NixdorfProCash 2050xeATM DEVICES - SERIES 2 Yes (click)

Hardware version:
EPP: Thales V5 P944-3183-15/A00, WN Order code “D:IPD-EP-AU51-2 EPP V5 PCI Australia 2 CES (AU)
Host Controller:
Embedded PCI compact C4-2000 (Celeron 2 GHz)
Embedded PCI compact C4-2930 (Celeron 2.93 GHz)
Embedded PCI compact P4-2000 (Pentium 2 GHz)
Embedded PCI compact P4-2800 (Pentium 2.8 GHz)
Embedded PCI compact P4-3400 (Pentium 3.4 GHz)

Firmware version:
EPP: 1900 - 03.2x, 191y - 02.0x, 1920 - 02.2x ; Host Controller: Windows XP / ProTopas v4.1/xx

Software version:
EPP: 1950 - 04.4x, 1952 - 04.7x, 1975 - 02.0x
EPP Bundled software: EPP PCI FW Version 4.4x (the above EPP firmware and application versions are bundled together into this version of software)
Host Controller API: ProCash NDC v1.4/xx

Conditions /Comments:

i) use of the ‘Double PEKEY’ method of key management is recommended; other options are acceptable subject to ensuring compliance with Section 5.4 of the CECS Manual, including use of rolling PIN encryption key;
ii) the state table must be configured to enforce:

  • timeout during key component entry configured to revert the application to a secure state; and
  • MAC verification to output only a true or false result.

  • Wincor-NixdorfProCash 2100xeATM DEVICES - SERIES 2 Yes (click)

    Hardware version:
    EPP: Thales V5 P944-3183-15/A00, WN Order code “D:IPD-EP-AU51-2 EPP V5 PCI Australia 2 CES (AU)
    Host Controller:
    Embedded PCI compact C4-2000 (Celeron 2 GHz)
    Embedded PCI compact C4-2930 (Celeron 2.93 GHz)
    Embedded PCI compact P4-2000 (Pentium 2 GHz)
    Embedded PCI compact P4-2800 (Pentium 2.8 GHz)
    Embedded PCI compact P4-3400 (Pentium 3.4 GHz)

    Firmware version:
    EPP: 1900 - 03.2x, 191y - 02.0x, 1920 - 02.2x ; Host Controller: Windows XP / ProTopas v4.1/xx

    Software version:
    EPP: 1950 - 04.4x, 1952 - 04.7x, 1975 - 02.0x
    EPP Bundled software: EPP PCI FW Version 4.4x (the above EPP firmware and application versions are bundled together into this version of software)
    Host Controller API: ProCash NDC v1.4/xx

    Conditions /Comments:

    i) use of the ‘Double PEKEY’ method of key management is recommended; other options are acceptable subject to ensuring compliance with Section 5.4 of the CECS Manual, including use of rolling PIN encryption key;
    ii) the state table must be configured to enforce:

  • timeout during key component entry configured to revert the application to a secure state; and
  • MAC verification to output only a true or false result.

  • Wincor-NixdorfProCash 2150xeATM DEVICES - SERIES 2 Yes (click)

    Hardware version:
    EPP: Thales V5 P944-3183-15/A00, WN Order code “D:IPD-EP-AU51-2 EPP V5 PCI Australia 2 CES (AU)
    Host Controller:
    Embedded PCI compact C4-2000 (Celeron 2 GHz)
    Embedded PCI compact C4-2930 (Celeron 2.93 GHz)
    Embedded PCI compact P4-2000 (Pentium 2 GHz)
    Embedded PCI compact P4-2800 (Pentium 2.8 GHz)
    Embedded PCI compact P4-3400 (Pentium 3.4 GHz)

    Firmware version:
    EPP: 1900 - 03.2x, 191y - 02.0x, 1920 - 02.2x ; Host Controller: Windows XP / ProTopas v4.1/xx

    Software version:
    EPP: 1950 - 04.4x, 1952 - 04.7x, 1975 - 02.0x
    EPP Bundled software: EPP PCI FW Version 4.4x (the above EPP firmware and application versions are bundled together into this version of software)
    Host Controller API: ProCash NDC v1.4/xx

    Conditions /Comments:

    i) use of the ‘Double PEKEY’ method of key management is recommended; other options are acceptable subject to ensuring compliance with Section 5.4 of the CECS Manual, including use of rolling PIN encryption key;
    ii) the state table must be configured to enforce:

  • timeout during key component entry configured to revert the application to a secure state; and
  • MAC verification to output only a true or false result.

  • Wincor-NixdorfSlim Cash 200ATM DEVICES - SERIES 2

    Hardware version:
    EPP: Thales V5 P944-3183-15/A00, WN Order code “D:IPD-EP-AU51-2 EPP V5 PCI Australia 2 CES (AU)
    Host Controller: Compact desktop PC
    Firmware version:
    EPP: 1900 - 03.2x, 191y - 02.0x, 1920 - 02.2x ; Host Controller: Windows XP / ProTopas v4.1/xx

    Software version:
    EPP: 1950 - 04.4x, 1952 - 04.7x, 1975 - 02.0x
    EPP Bundled software: EPP PCI FW Version 4.4x (the above EPP firmware and application versions are bundled together into this version of software)
    Host Controller API: Triton Direct Connect (TDC)

    Wincor-NixdorfSlim Cash 200ATM DEVICES - SERIES 2 Yes (click)

    Hardware version:
    EPP: Thales V5 P944-3183-15/A00, WN Order code “D:IPD-EP-AU51-2 EPP V5 PCI Australia 2 CES (AU)
    Host Controller: Compact desktop PC
    Firmware version:
    EPP: 1900 - 03.2x, 191y - 02.0x, 1920 - 02.2x ; Host Controller: Windows XP / ProTopas v4.1/xx

    Software version:
    EPP: 1950 - 04.4x, 1952 - 04.7x, 1975 - 02.0x
    EPP Bundled software: EPP PCI FW Version 4.4x (the above EPP firmware and application versions are bundled together into this version of software)
    Host Controller API: ProCash NDC v1.4/xx

    Conditions /Comments:

    i) use of the ‘Double PEKEY’ method of key management is recommended; other options are acceptable subject to ensuring compliance with Section 5.4 of the CECS Manual, including use of rolling PIN encryption key;
    ii) the state table must be configured to enforce:

  • timeout during key component entry configured to revert the application to a secure state; and
  • MAC verification to output only a true or false result.


  • Approval Expires 22/04/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    IngenicoAQ50EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: Rev 50
    Firmware version: Unicapt 32.3.x.x
    Software versions:

    • API SSA 00.27
    • API SSA 00.28
    • API SSA 00.29
    • API SSA 00.32
    • API SSA 00.33
    • API SSA 00.39,
    • API SSA 00.41,
    • API SSA 00.44,
    • API SSA 00.50

    Approval Expires 12/04/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    NCR668X SeriesATM DEVICES - SERIES 2 Yes (click)

    Hardware version: ATM: 6681
            6682
            6683
            6684
            6687
            6688
    EPP: 5815 EPP - hardware version 009-0028973
    Firmware version: ATM: APTRA XFS 06.xx.xx
            Scheme: IAC 7/2015
    EPP: INTL_64
    Software version: ACTIVATE 02.xx.xx

    Conditions /Comments:


    Approval Expires 11/04/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    SZZTZT598EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M1xx
    Firmware version: H16
    Software version: Not Applicable


    Approval Expires 10/04/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    PAX Computer Technology (Shenzhen)S80EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: S80-xxx-201 or S80-XXX-XX2-0XXX
    Firmware version: S80 PED 2.1
    Software version: SPS EFTPOS Ver 3.x.x

    PAX Computer Technology (Shenzhen)S90EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: S90-xxx-201, S90-xxx-xx2-0XXX
    Firmware version: S90 PED 2.1
    Software version: SPS EFTPOS V3.x.x

    PAX Computer Technology (Shenzhen)S90EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: S90-xxx-201
    Firmware version: S90 PED 2.1
    Software version: V3.x.x


    Approval Expires 04/04/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    CadmusCP03EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: G441-v2.1
    Firmware version: CP03SM APCA 1.16
    Software version: CP03 APCA 2.05

    CadmusCP03EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: G441-v2.1
    Firmware version: CP03SM APCA 1.21
    Software version: CP03 APCA 2.09

    Golden Port TechnologyM.POS2002EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: V5-1
    Firmware version: M.Secure Firmware V2.0.0
    Software version: APCA Application V2.0.0

    Conditions /Comments:

    Golden Port TechnologyM.POS2002EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: V5-1
    Firmware version: M.Secure Firmware V1.0.0
    Software version: APCA Application V1.0.0

    Conditions /Comments:

    IngenicoI7780EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: I7780MMT003D I7780MH10
    Firmware version: Unicapt 32.2.x.x
    Software versions:

    • API SSA 00.27
    • API SSA 00.27, application AU1X83_Coles
    • API SSA 00.28
    • API SSA 00.29
    • API SSA 00.32
    • API SSA 00.33
    • API SSA 00.39
    • API SSA 00.41,
    • API SSA 00.44,
    • API SSA 00.50
    IngenicoI7910EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: I7910MHT001A I7910MH10 I7910MH12
    Firmware version: Unicapt 32.2.x.x
    Software versions:

    • API SSA 00.27
    • API SSA 00.27, application AU1X83_Coles
    • API SSA 00.28
    • API SSA 00.29
    • API SSA 00.32
    • API SSA 00.33
    • API SSA 00.39
    • API SSA 00.41,
    • API SSA 00.44,
    • API SSA 00.50

    Approval Expires 21/03/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Wincor-NixdorfProCash 1500xeATM DEVICES - SERIES 2 Yes (click)

    Hardware version:
    EPP: Thales V5 P944-3183-15/A00, WN Order code “D:IPD-EP-AU51-2 EPP V5 PCI Australia 2 CES (AU)
    Host Controller:
    Embedded PCI compact C4-2000 (Celeron 2 GHz)
    Embedded PCI compact C4-2930 (Celeron 2.93 GHz)
    Embedded PCI compact P4-2000 (Pentium 2 GHz)
    Embedded PCI compact P4-2800 (Pentium 2.8 GHz)
    Embedded PCI compact P4-3400 (Pentium 3.4 GHz)

    Firmware version:
    EPP: 1900 - 03.2x, 191y - 02.0x, 1920 - 02.2x ; Host Controller: Windows XP / ProTopas v4.1/xx

    Software version:
    EPP: 1950 - 04.4x, 1952 - 04.7x, 1975 - 02.0x
    EPP Bundled software: EPP PCI FW Version 4.4x (the above EPP firmware and application versions are bundled together into this version of software)
    Host Controller API: ProCash NDC v1.4/xx

    Conditions /Comments:

    i) use of the ‘Double PEKEY’ method of key management is recommended; other options are acceptable subject to ensuring compliance with Section 5.4 of the CECS Manual, including use of rolling PIN encryption key;
    ii) the state table must be configured to enforce:

  • timeout during key component entry configured to revert the application to a secure state; and
  • MAC verification to output only a true or false result.

  • HypercomT42xxEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: 060001-060015
    Firmware version: AM v2.0 20080402
    AM v5.0 xxxxxxxx
    Software version: Suncorp version 1.0.6
    HICAPS version 01A
    Westpac version WSBX42.119
    HICAPS version H4G

    HypercomT42xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: 060001
    Firmware version: AM v2.0 20070607
    Software version: n/a

    Conditions /Comments:

    VeriFoneT42xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: 060001
    Firmware version: AM v2.0 20070607
    Software version: n/a

    Conditions /Comments:

    VeriFoneT42xxEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: 060001-060015
    Firmware version: AM v2.0 20080402
    AM v5.0 xxxxxxxx
    Software version: Suncorp version 1.0.6
    HICAPS version 01A
    Westpac version WSBX42.119
    HICAPS version H4G


    Approval Expires 19/03/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX690EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M260-x1x-xx-xxx-3
    M260-x1x-xx-xxx-3B
    M260-x5x-xx-xxx-3
    M260-x5x-xx-xxx-3B
    Firmware version: QT690260
    QT690261
    QT690262
    QT690263
    QT690264
    QTyy0500-20161202
    QTyy0500-20160401
    Software versions:

    • Verifone Australia - Payments as a Service
    • Softpay 03.xx
    • ENZSFEA0 1.00
    • VSS Script: AUS 1.0
    • WBC 720004XX
    • Cabcharge 700006XX
    • PAYware POS Currency Select version 01.03.xx, using security scripts PULH0001 and PULH0001b
    • Middleware App: SPI V2.X.X
    • Middleware App: SPI v2.X.XX
    VeriFoneVX690EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M260-x1x-xx-xxx-3
    M260-x1x-xx-xxx-3B
    M260-x5x-xx-xxx-3
    M260-x5x-xx-xxx-3B
    Firmware version: Security: ADK-SEC 1.1.1-xx / AU10122
    QT690260
    QT690261
    QT690262
    QT690263
    QT690264
    QTyy0500-20161202
    QTyy0500-20160401
    Software versions:

    • Bendigo 4.0.x
    • Westpac 01.01.xx
    • NAB 01.00.29
    • NAB 01.00.30

    Conditions /Comments:

    VeriFoneVX690EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M260-x5x-xx-xxx-3B
    Firmware version: QTyy0500-20161202
    Software version: Adyen 1.xx.xx


    Approval Expires 14/03/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFonee315EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M087-311-x0-xxx
    M087-312-x0-xxx
    Firmware version: e315: QTE30201
    CPESM:
    BootLoader = v1.00
    Keypad App = v2.05

    Software version: Adyen 1.xx.xx

    VeriFonee335EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M087-321-x0-xxx
    M087-322-x0-xxx
    Firmware version: e335: QTE30201
    CPESM:
    BootLoader = v1.00
    Keypad App = v2.05

    Software version: No Payment Application or Scripts available

    Conditions /Comments:


    Approval Expires 06/03/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVx510EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M251-xxx-3x-AUx
    Firmware version: QA0010A0
    QA0010A1
    QA0011A0
    QA0011A1
    QA0011A2
    QA0011A3
    QA0011A4
    QA0012A0
    QA0012A1
    QA0012A2
    Software versions:

    • security script APCA0001
    • SoftPay Base 2.20 Version 1.3.xx, using security script BBLSPS01
    • PAYware POS MBL Version 1.5xx, using security script MBL_0002
    • PAYware POS Bendigo application version 2.3.xx
    • PAYware POS Bendigo application version 3.3.xx security script BBLSPS01

    Conditions /Comments:

    VeriFoneVX610EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M256-xxx-3x-AUx
    Firmware version: QB0110A0
    Software versions:

    • security script APCA0001
    • SoftPay Base 2.20 Version 1.3.xx, using security script BBLSPS01

    Conditions /Comments:


    Approval Expires 02/03/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    PAX Computer Technology (Shenzhen)SP30EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: SP30-xxx-201 or SP30 -xxx-xx2-0xxx
    Firmware version: SP30 PED 2.1
    Software versions:

    • Version 3.x.x
    • WBC V3.X.X

    Approval Expires 21/02/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    SafeNetProtectHost White Mark IISECURITY CONTROL MODULES - SERIES 2

    Hardware version: PHW Rev.B
    Firmware version: M08.04.00W
    Software version: Mark II


    Approval Expires 10/02/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Hantle1700WATM DEVICES - SERIES 2

    Hardware version: ATM: Rev1X
    EPP: Hanmega EPP-B3: 20120753-1
    Firmware version: EPP:V04.09.XX
    Software versions:

    • OS:WIN CE
    • VA3.00.XX

    Approval Expires 19/01/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    EastcomPotevio 8100ATM DEVICES - SERIES 2

    Hardware version: V1.X
    Firmware version: V2.XX
    Software version: SWAP-TRITON-AUSV1.X.X


    Approval Expires 12/01/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX680EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M268-xxx-xx-APn-o
    Firmware version: QT68X20T
    QT680013
    QT680015
    QT680019
    QT680104
    QT680106
    QT680109
    QT680110
    QT680111
    QT680120
    QT680240
    QT680340
    QT6G0109
    QT6G0110
    QT6G0111
    QT6G0113
    QT6G0114
    QT6G0115
    QT6G0120
    QT6G0240
    QT6G0340
    QT680240.09182014
    QT6B0240.09182014
    QT6G0240.09182014
    QT680245
    QT6B0245
    QT6G0245
    QTyy0400-20150424
    QTyy0500-20161202
    QTyy0400-20150916
    QTyy0500-20160401
    Software versions:

    • Software Version: NAB1 Security Script VSS
    • VeriFone-EFTEX V1.0.8 security script EFTEX.vss
    • WOW 5605XX using security script A40_V100
    • NAB 01.00.29
    • NAB 01.00.30
    VeriFoneVX680EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M268-xxx-xx-APn-o
    Firmware version: QT68X20T
    QTyy0400-20150424
    QTyy0500-20161202 QTyy0500-20160401
    Software versions:

    • Software Version NAB1 Security Script VSS
    • VeriFone-EFTEX V1.0.8 security script EFTEX.vss

    Approval Expires 11/01/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX520EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M252-xxx-xx-xxn-o
    Firmware version: QT52E20M
    QT5G0016
    QT5G0019
    QT5G0104
    QT5G0110
    QT5G0111
    QT5S000D
    QT520006
    QT520013
    QT520016
    QT520019
    QT520104
    QT520110
    QT520111
    QT520112
    QT520120
    QT520240
    QT520240.09182014
    QT5G0240.09182014
    QT5H0240.09182014
    QT520245
    QT5G0245
    QT5H0245
    Software versions:

    • Security Script:apca.vss
    • VeriFone-EFTEX V1.0.8 security script EFTEX.vss
    • Verifone Australia - Payments as a Service
    • Softpay 03.xx
    • ENZSFEA01.00.xx
    • VSS Script: AUS 1.0
    • Suncorp 1.01.x

    Conditions /Comments:

    VeriFoneVX520EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M252-xxx-xx-xxn-o
    Firmware version: QT52E20M
    QT5S000D
    QT520013
    QT520016
    QT5G0016
    QT520240.09182014
    QT5G0240.09182014
    QT5H0240.09182014
    QT520245
    QT5G0245
    QT5H0245
    Software version: PAYware POS Bendigo V3.3.xx security script BBLSPS01

    Conditions /Comments:

    VeriFoneVX680EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M268-xxx-xx-APn-o
    Firmware version: QT68X20T
    QT680013
    QT680015
    QT680019
    QT680104
    QT680106
    QT680109
    QT680110
    QT680111
    QT680120
    QT680240
    QT680340
    QT6G0109
    QT6G0110
    QT6G0111
    QT6G0113
    QT6G0114
    QT6G0115
    QT6G0120
    QT6G0240
    QT6G0340
    QT680240.09182014
    QT6B0240.09182014
    QT6G0240.09182014
    QT680245
    QT6B0245
    QT6G0245
    QTyy0400-20150424
    QTyy0500-20161202
    QTyy0400-20150916
    QTyy0500-20160401
    Software versions:

    • Travelex V1.2.xx with Security Script: PULH0001.vss
    • Software Version Security Script: apca.vss
    • VeriFone-EFTEX V1.0.8 security script EFTEX.vss
    • "Verifone Australia - Payments as a Service"
    • Softpay: 03.xx; SFEA: ENZSFEA01.00.xx; VSS Script: AUS 1.0
    • NAB 01.00.26
    • NAB 01.00.30
    • Westpac 01.01.xx

    Conditions /Comments:

    VeriFoneVX680EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M268-xxx-xx-APn-o
    Firmware version: QT680104
    QTyy0400-20150424
    QTyy0500-20161202
    QTyy0400-20150916
    QTyy0500-20160401
    Software versions:

    • Security Scripts: 2.0,
    • Payment Core: 3.xx
    • PAYware POS Bendigo V3.3.xx: Security Script BBLSPS01
    • VeriFone-EFTEX V1.0.8 security script EFTEX.vss

    Conditions /Comments:

    VeriFoneVX680EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M268-xxx-xx-APn-o
    Firmware version: Security: ADK-SEC 1.1.1-xx / AU10122
    QT68X20T
    QT680013
    QT680015
    QT680019
    QT680104
    QT680106
    QT680109
    QT680110
    QT680111
    QT680120
    QT680240
    QT680340
    QT6G0109
    QT6G0110
    QT6G0111
    QT6G0113
    QT6G0114
    QT6G0115
    QT6G0120
    QT6G0240
    QT6G0340
    QT680240.09182014
    QT6B0240.09182014
    QT6G0240.09182014
    QT680245
    QT6B0245
    QT6G0245
    QTyy0400-20150424
    QTyy0500-20161202
    QTyy0400-20150916
    QTyy0500-20160401
    Software version: Bendigo 4.0.x

    Conditions /Comments:

    VeriFoneVX680EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M268-xxx-xx-APn-o
    Firmware version: QTyy0500-20161202
    Software version: Adyen 1.xx.xx

    VeriFoneVX820EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M282-xxx-xx-xxn-o
    Firmware version: QT820106
    QT820240.09182014
    QT820245
    QYyy0400-20150424
    QTyy0400-20150916
    QTyy0500-20160401
    QTyy0500-20161202
    Software versions:

    • Payment Core: 3.xx: Security Script 2.0,
    • PAYware POS Bendigo V3.3.xx: security script BBLSPS01

    Conditions /Comments:

    VeriFoneVX820EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M282-xxx-xx-xxn-o
    Firmware version: QT820004
    QT820013
    QT820015
    QT820016
    QT820019
    QT820104
    QT820105
    QT820106
    QT820107
    QT820109
    QT820110
    QT820111
    QT820120
    QT820121
    QT820240
    QT820340
    QT820240.09182014
    QT820245
    QYyy0400-20150424
    QTyy0400-20150916
    QTyy0500-20160401
    QTyy0500-20161202
    Software versions:

    • Security Script apca.vss
    • PAYware POS Bendigo V3.3.xx: security script BBLSPS01
    • "Verifone Australia - Payments as a Service"
    • Softpay: 03.xx; SFEA: ENZSFEA01.00.xx; VSS Script: AUS 1.0
    • NAB 01.00.26
    • NAB 01.00.29
    • NAB 01.00.30
    • Westpac 01.01.xx
    • Cabcharge 690006XX

    Conditions /Comments:

    VeriFoneVX820EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M282-xxx-xx-xxn-o
    Firmware version: QT820004
    QT820013
    QT820015
    QT820016
    QT820019
    QT820104
    QT820105
    QT820106
    QT820107
    QT820109
    QT820110
    QT820111
    QT820120
    QT820121
    QT820240
    QT820340
    QT820240.09182014
    QT820245
    QYyy0400-20150424
    QTyy0400-20150916
    QTyy0500-20160401
    QTyy0500-20161202
    Software versions:

    • WOW 5601XX using security script A40_V100
    • WOW 5605XX using security script A40_V100
    • APO 02.01.XX using security script A40_V102
    • APO 03.01.XX using security script A40_V103
    • APO 03.03.XX using security script A40_V103
    • NAB1.0
    • PAYware POS Bendigo V3.3.xx: security script BBLSPS01
    • Suncorp 1.01.xx
    • "Verifone Australia - Payments as a Service"
    • Softpay: 03.xx; SFEA: ENZSFEA01.00.xx; VSS Script: AUS 1.0
    VeriFoneVX820EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M282-xxx-xx-xxn-o
    Firmware version: QTyy0500-20161202
    Software version: Adyen 1.xx.xx


    Approval Expires 10/01/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX820EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M282-xxx-xx-xxn-o
    Firmware version: Security: ADK-SEC 1.1.1-xx / AU10122
    QT820004
    QT820013
    QT820015
    QT820016
    QT820019
    QT820104
    QT820105
    QT820106
    QT820107
    QT820109
    QT820110
    QT820111
    QT820120
    QT820121
    QT820240
    QT820340
    QT820240.09182014
    QT820245
    QYyy0400-20150424
    QTyy0400-20150916
    QTyy0500-20160401
    QTyy0500-20161202
    Software versions:

    • Travelex V1.2.xx with Security Script: PULH0001.vss
    • Bendigo 4.0.x
    • Cabcharge 04.03.XX with Security Script A40_V102

    Conditions /Comments:

    SafeNetProtectHost White AMBSECURITY CONTROL MODULES - SERIES 2 Yes (click)

    Hardware version: PHW Rev.B
    Firmware version: Software version: AMB A10.00.04
    Software version: AMB

    Conditions /Comments:


    Approval Expires 09/01/2020

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    IngenicoI6780EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: TPD031A I6780MH01
    Firmware version: Unicapt 32.3.x.x
    Software versions:

    • API SSA.029
    • API SSA 00.39
    • API SSA 00.41,
    • API SSA 00.44,
    • API SSA 00.50

    Conditions /Comments:


    Approval Expires 19/12/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Chungho ComnetXtremo 7100ATM DEVICES - SERIES 2 Yes (click)

    Hardware version:
    7100
    EPP: 6303
    Host Controller: HNCCN7100EM

    Firmware version:
    EPP: AU02
    Host Controller: Windows CE .NET 4.2

    Software version:
    Host Controller: REAL 20060220

    Conditions /Comments:

    i) The device must be fitted with an alarm to detect unauthorised access to the upper chamber.

    Smartpay/PAXPAX S800KEY LOADING AND TRANSFER DEVICES - SERIES 2

    Hardware version: S800-abc-dx3-0xxx
    Firmware version: Prolin 21.3xx.xxx.xxx.1xx
    OS 2.4.67
    Software version: Smartpay KLD 1.0.0.6


    Approval Expires 17/12/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    DatecsBluepad-50EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: 02.02.xx.xxBN
    02.02.xx.xxBR
    Firmware version: 02.04.x.x
    Software version: no payment application yet approved

    Conditions /Comments:

    IngenicoICMPEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: iCMxxx-01Txxxxx
    iCMxxx-11Txxxxx
    ICMxxx-21Txxxxx
    ICMxxx-31T-xxxxx;
    Firmware version: 820305V01.xx
    820365V02.xx
    820528V02.xx
    820539V01.xx
    820073V01.xx
    Software versions:

    • Payment app: ANZ v9.39

    • Payment app: Coles v9.00

    • Middlware app: IP protocol software 82007V01.xx
    • Middleware app: TSA Version 1.10
    • Middleware app: TSA Version 1.12
    QuestMT330EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: 800-004x-0y
    800-004-1y
    Firmware version: 05.xx.yy
    06.xx.yy
    Software version: N.A.

    Conditions /Comments:

    VeriFoneVX600 BluetoothEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M087-2x1-xx-xxx-3
    Firmware version: QT600101
    Software version: no payment application yet approved

    Conditions /Comments:

    GilbarcoGilbarco M3cUNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

    Hardware version: Display: SPOT M3c Display Rev. B
    Keyboard: GVR SPOT Keypad Unit 2.0, Rev. B
    Card Reader: MagTek HCR2 Rev 14.x , Rev17.x, Rev 17.1
    Firmware version: OS: 01.03 & 01.04
    MagTek HCR2: E0x, H0x, J0x, J03, J05
    PIN Pad: 03.01, V03.02, V3.04, 03.05
    Software versions:

    • AS2805 V03.01
    • AS2805 V03.02

    Conditions /Comments:


    Approval Expires 14/12/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Thumbzup UK LimitedtCR2EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: P5.0.2
    P5.0.2.x
    Firmware version: 3.0.7
    3.0.10
    3.0.12
    3.0.13
    3.0.14
    3.1.2
    3.0.15
    3.1.3
    3.1.4
    Software version: Not Applicable


    Approval Expires 05/12/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    UIC (Uniform Industrial)TS890EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: TS890-DMxxxxxxAxxx (Non-OP and Online Only)
    TS890-EMxxxxxxAxxx (OP and Online Only)
    TS890-GMxxxxxxAxxx (OP and Online Only)
    TS890-AMxxxxxxAxxx (OP and Online Only)
    TS890-DHxxxxxxAxxx (Non-OP, Online and Offline)
    TS890-EHxxxxxxAxxx (OP, Online and Offline)
    TS890-GHxxxxxxAxxx (OP, Online and Offline)
    TS890-AHxxxxxxAxxx (OP, Online and Offline)
    TS890-DMxxxxxxBxxx (Non-OP and Online Only)
    TS890-EMxxxxxxBxxx (OP and Online Only)
    TS890-GMxxxxxxBxxx (OP and Online Only)
    TS890-AMxxxxxxBxxx (OP and Online Only)
    TS890-DHxxxxxxBxxx (Non-OP, Online and Offline)
    TS890-EHxxxxxxBxxx (OP, Online and Offline)
    TS890-GHxxxxxxBxxx (OP, Online and Offline)
    TS890-AHxxxxxxBxxx (OP, Online and Offline)
    TS890-DSxxxxxxBxxx (Non-OP and Online Only)
    TS890-ESxxxxxxBxxx (OP and Online Only)
    TS890-GSxxxxxxBxxx (OP and Online Only)
    TS890-DMxxxxxxAxxx (Non-OP and Online Only)
    TS890-EMxxxxxxAxxx (OP and Online Only)
    TS890-GMxxxxxxAxxx (OP and Online Only)
    TS890-AMxxxxxxAxxx (OP and Online Only)
    TS890-DHxxxxxxAxxx (Non-OP, Online and Offline)
    TS890-EHxxxxxxBxxx (OP, Online and Offline)
    TS890-GHxxxxxxBxxx (OP, Online and Offline)
    TS890-AHxxxxxxBxxx (OP, Online and Offline)
    TS890-DSxxxxxxBxxx (Non-OP and Online Only)
    TS890-ESxxxxxxBxxx (OP and Online Only)
    TS890-GSxxxxxxBxxx (OP and Online Only)
    TS890-ASxxxxxxBxxx (OP and Online Only)
    TS890-DRxxxxxxBxxx (Non-OP, Online and Offline)
    TS890-ERxxxxxxBxxx (OP, Online and Offline)
    TS890-GRxxxxxxBxxx (OP, Online and Offline)
    Firmware version: IPP s100, RFS0010, RFS0020
    Software version: None yet approved

    Conditions /Comments:


    Approval Expires 04/12/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    ThalesHSM8000SECURITY CONTROL MODULES - SERIES 2

    Hardware version: HSM8-xxxxx
    Firmware version: 2.4
    Software versions:

    • 2.4x 1053-084x
    • 2.4 1003-0821

    Approval Expires 17/11/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    PAX Computer Technology (Shenzhen)S80EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: S80-MGL-xx3-0xxx, S80-MCL-xx3-0xxx, S80-MTL-xx3-0xxx
    S80-MWL-xx3-0xxx, S80-MEL-xx3-0xxx, S80-M0L-xx3-0xxx
    S80-MGW-xx3-0xxx, S80-MCW-xx3-0xxx, S80-MTW-xx3-0xxx
    S80-MWW-xx3-0xxx, S80-MEW-xx3-0xxx, S80-M0W-xx3-0xxx
    S80-MGA-xx3-0xxx, S80-MCA-xx3-0xxx, S80-MTA-xx3-0xxx
    S80-MWA-xx3-0xxx, S80-MEA-xx3-0xxx, S80-M0A-xx3-0xxx
    S80-MG0-xx3-0xxx, S80-MC0-xx3-0xxx, S80-MT0-xx3-0xxx
    S80-MW0-xx3-0xxx, S80-ME0-xx3-0xxx, S80-M00-xx3-0xxx
    S80-0GL-xx3-0xxx, S80-0CL-xx3-0xxx, S80-0TL-xx3-0xxx
    S80-0WL-xx3-0xxx, S80-0EL-xx3-0xxx, S80-00L-xx3-0xxx
    S80-0GW-xx3-0xxx, S80-0CW-xx3-0xxx, S80-0TW-xx3-0xxx
    S80-0WW-xx3-0xxx, S80-0EW-xx3-0xxx, S80-00W-xx3-0xxx
    S80-0GA-xx3-0xxx, S80-0CA-xx3-0xxx, S80-0TA-xx3-0xxx
    S80-0WA-xx3-0xxx, S80-0EA-xx3-0xxx, S80-00A-xx3-0xxx
    S80-0G0-xx3-0xxx, S80-0C0-xx3-0xxx, S80-0T0-xx3-0xxx
    S80-0W0-xx3-0xxx, S80-0E0-xx3-0xxx, S80-000-xx3-0xxx
    Firmware version: S80 PED 3.1
    Software version: WBC 3.X.X

    PAX Computer Technology (Shenzhen)S90EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: S90-MGW-xx3-0xxx, S90-MCW-xx3-0xxx, S90-MTW-xx3-0xxx, S90-MWW-xx3-0xxx
    S90-MEW-xx3-0xxx, S90-M0W-xx3-0xxx, S90-MG0-xx3-0xxx, S90-MC0-xx3-0xxx
    S90-MT0-xx3-0xxx, S90-MW0-xx3-0xxx, S90-ME0-xx3-0xxx, S90-M00-xx3-0xxx
    S90-0GW-xx3-0xxx, S90-0CW-xx3-0xxx, S90-0TW-xx3-0xxx, S90-0WW-xx3-0xxx
    S90-0EW-xx3-0xxx, S90-00W-xx3-0xxx, S90-0G0-xx3-0xxx, S90-0C0-xx3-0xxx
    S90-0T0-xx3-0xxx, S90-0W0-xx3-0xxx, S90-0E0-xx3-0xxx, S90-000-xx3-0xxx
    Firmware version: S90 PED 3.1
    Software versions:

    • WBC V3.X.X
    • SPS EFTPOS 3.X.X
    PAX Computer Technology (Shenzhen)SP30EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: SP30-xxx-xx2-1xxx
    Firmware version: SP30 PED 2.1
    Software version: WBC V3.X.X


    Approval Expires 16/11/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    GRG Banking Equipment Co. LtdEPP-004ENCRYPTING PIN PADS - SERIES 2

    Hardware version: YT2.232.0301V1.xx
    Firmware version: YT2.480.0420V1.xx
    Software version: Not Applicable


    Approval Expires 10/11/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Atos Worldline SA/NVYoximoEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: 9068xxxxxx Rev: Ax
    9068xxxxxx Rev: Bx
    Firmware version: SRED: 03.02.14D
    SRED: 03.03.02D01
    with Sxx.xx.xx 1 (loaded SBCE non-PIN data prompts table)
    and Mxx.xx.xx 2(loaded Maps non-PIN data prompts table)
    Non SRED: 03.03.02
    Open Protocols platform: 00.xx.xx.xx-xx.05
    Software version: N.A.


    Approval Expires 28/10/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Hyosung TNS INCNH-2700CEATM DEVICES - SERIES 2

    Hardware version: Rev. 1.X
    Firmware version: V09.00.XX EPP 7000 Rev. 1.X
    Software version: V06.00.XX

    Nautilus HyosungNH-2700CEATM DEVICES - SERIES 2

    Hardware version: Rev. 1.X
    Firmware version: V09.00.XX EPP 7000 Rev. 1.X
    Software version: V06.00.XX

    NeoICP KoreacashPod 60xxNAATM DEVICES - SERIES 2

    Hardware version: ATM Hardware Version: VB 7009 Rev.A
    EPP Hardware Version: V1.4x
    Firmware version: ATM Firmware Version: Security v1.0
    EPP Firmware Version: P7a
    Software version: NT-020x.xx

    NeoICP KoreacashPod 60xxSAATM DEVICES - SERIES 2

    Hardware version: ATM Hardware Version: VB 7009 Rev.A
    EPP Hardware Version: V1.4x
    Firmware version: ATM Firmware Version: Security v1.0
    EPP Firmware Version: P7a
    Software version: Nt-020x.xx


    Approval Expires 27/10/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Hyosung TNS INCMoniMax 2900ATM DEVICES - SERIES 2

    Hardware version: Rev. 1x
    Firmware version: V09.00.XX; EPP Version: EPP700 Rev.1x
    Software version: V02.XX.XX

    Hyosung TNS INCMoniMax 5600TATM DEVICES - SERIES 2

    Hardware version: Rev. 1x EPP Version: EPP 7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.XX

    Hyosung TNS INCMoniMax 5600ATM DEVICES - SERIES 2

    Hardware version: Rev. 1x EPP Version: EPP 7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.XX

    Hyosung TNS INCMonimax 7600TATM DEVICES - SERIES 2

    Hardware version: ATM: Rev. 1X
    EPP: EPP7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.xx

    Hyosung TNS INCMoniMax 7600ATM DEVICES - SERIES 2

    Hardware version: ATM: Rev. 1X
    EPP: EPP 7000 Rev. 1X
    Firmware version: ATM: V09.00XX
    Software version: V01.04.xx

    Hyosung TNS INCNH-1800CEATM DEVICES - SERIES 2

    Hardware version: Rev. 1x EPP Version: EPP 7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.XX

    Nautilus HyosungMoniMax 2900ATM DEVICES - SERIES 2

    Hardware version: Rev. 1x
    Firmware version: V09.00.XX; EPP Version: EPP700 Rev.1x
    Software version: V02.XX.XX

    Nautilus HyosungMoniMax 5600TATM DEVICES - SERIES 2

    Hardware version: Rev. 1x EPP Version: EPP 7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.XX

    Nautilus HyosungMoniMax 5600ATM DEVICES - SERIES 2

    Hardware version: Rev. 1x EPP Version: EPP 7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.XX

    Nautilus HyosungMonimax 7600TATM DEVICES - SERIES 2

    Hardware version: ATM: Rev. 1X
    EPP: EPP7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.xx

    Nautilus HyosungMoniMax 7600ATM DEVICES - SERIES 2

    Hardware version: ATM: Rev. 1X
    EPP: EPP 7000 Rev. 1X
    Firmware version: ATM: V09.00XX
    Software version: V01.04.xx

    Nautilus HyosungNH-1800CEATM DEVICES - SERIES 2

    Hardware version: Rev. 1x EPP Version: EPP 7000 Rev. 1x
    Firmware version: V09.00.XX
    Software version: V01.04.XX

    DatecsBluepad-5000EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: 02.05.xx.xxabcd
             a: B, N
             b: R, N
             c: W, N
             d: G, N
    Firmware version: 2.5.xx.xx
    Software version: Not As Yet Approved

    Conditions /Comments:


    Approval Expires 23/10/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    XAC Automation CorpxAPT-103PEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: T0MXXXXU1CXX4X
    Firmware version: 20010850
    Software version: POSiQ (FDI) V1.0.X.X

    Conditions /Comments:


    Approval Expires 20/10/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    XAC Automation CorpxAPT-103EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: T0NXXXXB1CXX4X
    Firmware version: 2001A062
    Software version: POSiQ (FDI) V1.0.X.X

    Conditions /Comments:


    Approval Expires 16/10/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    XAC Automation Corp8006L2-3CREFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: T0FXX4XX3XXX4X
    Firmware version: 2001A063
    Software version: POSiQ (FDI) 1.0.X.X

    Conditions /Comments:

    The application must provide a data key used for Privacy of Communications
    The DUKPT PIN encrypting key size will be 16 bytes.

    XAC Automation Corp8006L2-3CEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: T0FXXXEB3CHX4X
    Firmware version: 20010350
    Software version: POSiQ (FDI) 1.0.X.X

    Conditions /Comments:

    The application must provide a data key used for Privacy of Communications
    The DUKPT PIN encrypting key size will be 16 bytes.


    Approval Expires 05/10/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Hyosung TNS INCMoniMax 8200ATM DEVICES - SERIES 2

    Hardware version: ATM: Rev.1x
    EPP: EPP 7000 Rev. 1x
    Firmware version: EPP: V09.00.XX
    Software version: V01.04.XX

    Nautilus HyosungMoniMax 8200ATM DEVICES - SERIES 2

    Hardware version: ATM: Rev.1x
    EPP: EPP 7000 Rev. 1x
    Firmware version: EPP: V09.00.XX
    Software version: V01.04.XX


    Approval Expires 30/08/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    PAX Computer Technology (Shenzhen)D210EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: D210-xxx-xx4-0xxx
    Firmware version: 4.00.xx
    Software version: SMARTPAY 4.5.x


    Approval Expires 09/08/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    IngenicoIPA2xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: IPA2xx-01Txxxxx
    Firmware version: 820305 v01.xx; scheme version: 820365 v01.xx
    Software versions:

    • TSA v1.01
    • TSA v1.02
    • TSA v1.03
    • TSA v1.04
    • TSA v1.05
    • TSA v1.07
    • TSA v1.10
    • TSA v1.11

    Conditions /Comments:

    IngenicoIPA2xxEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: IPA2xx-01Txxxxx
    Firmware version: 820305 V01.xx
    820365 V01.xx -Key Scheme
    Software versions:

    • Payment app: ANZ v9.39

    • Payment app: Coles v9.00 BR>
    • Middleware app: TSA v1.12
    IngenicoIPP3xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: IPP3xx-01Txxxxx
    Firmware version: 820305 v01.xx; scheme version: 820365 v01.xx
    Software versions:

    • DPS V2.1000
    • TSA v1.01
    • TSA v1.02
    • TSA v1.03
    • TSA v1.04
    • TSA v1.05
    • TSA v1.07
    • TSA v1.10
    • TSA v1.11

    Conditions /Comments:

    IngenicoIPP3xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: IPP3xx-11Txxxxx
    Firmware version: 820305 v02.xx;
    scheme version: 820365 v02.xx
    Software versions:

    • Payment app: ANZ v9.39

    • Payment app: Coles v9.00

    • Middleware app: TSA v1.12

    Conditions /Comments:

    IngenicoIPP3xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: IPP3xx-01Txxxxx
    Firmware version: 820305 v01.xx;
    scheme version: 820365 v01.xx
    Software versions:

    • Payment app: ANZ v9.39

    • Payment app: Coles v9.00

    • Middleware app: TSA v1.12

    Conditions /Comments:


    Approval Expires 08/08/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Wincor-NixdorfCineo C25xxATM DEVICES - SERIES 2 Yes (click)

    Hardware version: ATM: C2550
    ATM: C2560
    EPP: Verifone EPP6 P030-3xxx-0x
    Firmware version: EPP: 1901– 04.1x
    EPP: 1915– 03.1x
    EPP: 1921– 04.2x
    Software versions:

    • ATM: Windows 7
    • ATM: Probase/C 1.2/xx
    • ATM: ProFlex4/NDC V4.1/xx
    • EPP: 1932 – 01.3x
    • EPP: 1950 – 06.2x (SHA-1)
    • EPP: 1950 – 07.0x (SHA-2)
    • EPP: 1975 – 02.3x (SHA-1)
    • EPP: 1975 – 03.0x (SHA-2)

    Conditions /Comments:

    Wincor-NixdorfCineo Cxxxx RL/FLATM DEVICES - SERIES 2 Yes (click)

    Hardware version: ATM: C2060 RL
    ATM: C2060 FL
    ATM: C2080 RL
    ATM: C2080 FL
    ATM: C4040 FL
    ATM: C4060 RL
    ATM: C4060 FL
    ATM: C4080 RL
    ATM: C4080 FL
    ATM: C4560
    ATM: C4580
    EPP: Verifone EPP6 P030-3xxx-0x
    Firmware version: EPP: 1901– 04.1x
    EPP: 1915– 03.1x
    EPP: 1921– 04.2x
    Software versions:

    • ATM: Windows 7
    • ATM: Probase/C 1.2/xx
    • ATM: ProFlex4/NDC V4.1/xx
    • EPP: 1932 – 01.3x
    • EPP: 1950 – 06.2x (SHA-1)
    • EPP: 1950 – 07.0x (SHA-2)
    • EPP: 1975 – 02.3x (SHA-1)
    • EPP: 1975 – 03.0x (SHA-2)

    Conditions /Comments:


    Approval Expires 07/08/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    XAC Automation CorpEPP: UPT-303 & SCR: P90UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

    Hardware version: EPP: xUPT-303: TOK7XXEX39XX4X
    SCR: P90: SHR1XOXXXX64CX
    Firmware version: EPP: xUPT-303: 20010651
    SCR: P90: 20000112
    Software version: POSiQ (Caltex) 1.0.X.X

    Conditions /Comments:


    Approval Expires 02/08/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    GilbarcoSPOT M3cKEY LOADING AND TRANSFER DEVICES - SERIES 2 Yes (click)

    Hardware version: Display: SPOT M3c Display Rev.B
    Keyboard: GVR SPOT Keypad Unit 2.0 Rev.B
    Firmware version: OS 01.03
    Software versions:

    • LoadingDevices 01.07 (LD)
    • ActivationDevices 02.01 (AD)
    • MSDAustralia 01.00 (MSD)

    Conditions /Comments:


    Approval Expires 20/07/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Diebold5500, 5700, 5750ATM DEVICES - SERIES 2

    Hardware version: ATM:5500, 5700, 5750
    EPP: AUS1316-57xx
    Firmware version: ATM: XFSv6.0.x
    Scheme: IAC 7/2016
    EPP: 414-2020 R2K
    Software versions:

    • Windows 7
    • AgilisŪ 3 91x 3.4.x

    Approval Expires 16/07/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    GemaltoSafeNet Payment HSM ( GRK-13)SECURITY CONTROL MODULES - SERIES 2 Yes (click)

    Hardware version: 808-000059-002
    Firmware version: 6.10.5
    Software versions:

    • 2.1.0
    • 2.2.0-xx

    Conditions /Comments:

    SafeNetLuna EFT 2.1SECURITY CONTROL MODULES - SERIES 2 Yes (click)

    Hardware version: 808-000059-002
    Firmware version: 6.10.5
    Software version: 2.1

    Conditions /Comments:


    Approval Expires 16/05/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    GRG Banking Equipment Co. LtdEPP-003ENCRYPTING PIN PADS - SERIES 2 Yes (click)

    Hardware version: V1.xx
    Firmware version: V1.xx

    Conditions /Comments:


    Approval Expires 01/05/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Atos Worldline SA/NVYomani MLEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: 90700100xx Rev: Ax
    90700100xx Rev: Bx
    Firmware version: Non SRED: 03.03.02
    SRED: 03.02.14D; 03.03.02D01; Sxx.xx.xx ; Mxx.xx.xx
    Open Protocols platform: 00.xx.xx.xx-xx.03; 00.xx.xx.xx-xx.05
    Software version: N.A.

    Atos Worldline SA/NVYomani XREFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: 90700000xx Rev: Ax
    90700000xx Rev: Bx
    90700200xx Rev: Ax
    90700200xx Rev: Bx
    Firmware version: Non SRED: 03.03.02
    SRED: 03.02.14D
    SRED: 03.03.02D01
    Sxx.xx.xx
    Mxx.xx.xx
    Open Protocols platform: 00.xx.xx.xx-xx.03; 00.xx.xx.xx-xx.05
    Software version: N.A.


    Approval Expires 24/04/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX520 GPRS CTLSEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M252-xxx-xx-xxx-3
    Firmware version: QT5G0104
    QT5G0110
    QT5G0111
    QT520110
    QT520111
    QT520112
    QT5G0120
    QT5G0240
    QT520240.09182014
    QT5G0240.09182014
    QT5H0240.09182014
    QT520245
    QT5G0245
    QT5H0245
    Software versions:

    • Verifone Australia - Payments as a Service
    • Softpay 03.xx
    • ENZSFEA01.00.xx
    • VSS Script: AUS 1.0
    • Westpac 01.01.XX

    Approval Expires 20/04/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX520EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M252-xxx-xx-xxn-o
    Firmware version: QT520109
    QT520240.09182014
    QT5G0240.09182014
    QT5H0240.09182014
    QT520245
    QT5G0245
    QT5H0245
    Software version: Security Scripts: 2.0, Payment Core: 3.xx


    Approval Expires 19/04/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    IngenicoiSMP3EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: IMP5xx-01Txxxxx
    IMP5xx-11Txxxxx (CTLS support)
    Firmware version: 820305 V11.xx (base firmware)
    820365 V02.xx (key schemes)
    820073 V01.xx (Open Protocol module)
    820528V02.xx (SRED module)
    Software versions:

    • Payment App: Coles v9.00
    • RAM APP(RA1): v11.33, v11.35
    • RA2: v01.xx
    • RA5: v01.xx
    • PROMPT TABLE: v00.03
    • Middleware App : TSA V1.10, TSA V1.12

    Approval Expires 19/03/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX520C D/E CTLSEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M252-xxx-xx-xxx-3
    Firmware version: QT5G0110
    QT5G0111
    QT520109
    QT520110
    QT520111
    QT520112
    QT520120
    QT520240
    QTxx0245-140411
    QTxx0400-20150424
    QTxx0400-20150916
    QTxx0500-20160401
    QTxx0500-20161202
    Software version: None provided as yet

    Conditions /Comments:


    Approval Expires 13/03/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVX675EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M265-xxx-xx-xxx-3
    Firmware version: QT650101
    QT650102
    QT650103
    QT650104
    QT650120
    QT650240
    QT650240.09182014
    QT650245
    QT650251
    QT650252
    QT650253
    QTyy0400-20150424
    QTyy0400-20150916
    QTyy0500-20161202
    QTyy0500-20160401
    Software versions:

    • Verifone Australia - Payments as a Service
    • Softpay 03.xx
    • ENZSFEA01.00.xx
    • VSS Script: AUS 1.0
    • Westpac 01.01.xx
    VeriFoneVX675EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M265-xxx-xx-xxx-3
    Firmware version: QT650104
    QT650240.09182014
    QT650245
    QT650251
    QT650252
    QT650253
    QTyy0400-20150424
    QTyy0400-20150916
    QTyy0500-20161202
    QTyy0500-20160401
    Software version: Security Scripts: 2.0, Payment Core: 3.xx

    VeriFoneVX675EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M265-xxx-xx-xxx-3
    Firmware version: QTyy0500-20161202
    Software version: Adyen 1.xx.xx


    Approval Expires 08/03/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    InvencoG6OPTUNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

    Hardware version: 01.00.xx
    1.06
    1.07
    Firmware version: 01.00.xx
    2.01
    v2.06.16
    Software version: No Application Approved

    Conditions /Comments:


    Approval Expires 19/02/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    IngenicoICT2xxEFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: ICT2xx-01Txxxxx
    Firmware version: 820305 V01.xx
    Software versions:

    • TSA v1.01
    • TSA v1.02
    • TSA v1.03
    • TSA v1.04
    • TSA V1.05
    • TSA v1.07
    • TSA v1.10
    • TSA v1.11

    Conditions /Comments:

    IngenicoiCT2xxEFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: ICT2xx-01Txxxxx
    Firmware version: 820305 V01.xx
    Software versions:

    • Payment app: ANZ v9.39

    • Payment app: Coles v9.00

    • Middleware app: TSA v1.12

    Approval Expires 15/02/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    Shenzhen Justtide TechnologyJUST E6060ENCRYPTING PIN PADS - SERIES 2

    Hardware version: V100A
    Firmware version: 3509
    3515
    Software version: Not Applicable


    Approval Expires 14/02/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    PAX Computer Technology (Shenzhen)PAX S300EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: S300-abc-dx3-0xxx
    Firmware version: Prolin 21.3xx.xxx.xxx.1xx (Boot 1.0.0 APCA 001)
    Software version: No Application has yet been submitted

    Conditions /Comments:


    Approval Expires 11/02/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    PAX Computer Technology (Shenzhen)PAX S800EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: S800-abc-dx3-0xxx
    Firmware version: Prolin 21.3xx.xxx.xxx.1xx (Boot 1.0.0 APCA 001)

    Conditions /Comments:

    PAX Computer Technology (Shenzhen)PAX S900EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: S900-abc-dx3-0xxx
    Firmware version: Prolin 21.3xx.xxx.xxx.1xx (Boot 1.0.0 APCA 001)

    Conditions /Comments:


    Approval Expires 27/01/2019

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    IngenicoI9500EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: PIN Pad: 953P201 / Reader: i9550P201 Note the inclusion of ICC Reader
    Firmware version: Unicapt32 3.x.y
    Software versions:

    • SSA 04.XX
    • API SSA 00.39

    Conditions /Comments:

    IngenicoI9500ENCRYPTING PIN PADS - SERIES 2

    Hardware version: PIN Pad: 953P201 / Reader: i9550P201 Note the inclusion of ICC Reader
    Firmware version: Unicapt32 3.x.y
    Software versions:

    • SSA 00.33
    • SSA 00.39
    • 1.01 (DPS)
    • SSA 00.41,
    • SSA 00.44,
    • SSA 00.50

    Approval Expires 14/12/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    IngenicoLane/5000EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: LAN50AB (No contactless)
    LAN50BB (Contactless)

    Firmware version: 820547v01.xx
    820376v01.xx
    820549v01.xx (SRED)
    820548v01.xx (Open Protocol)

    Software versions:

    • Payment App: NAB v00.09.00

    • Middleware app: TSA V1.20
    • Middleware app: Merchant Entry v00.56.00
    • Middleware app: Business Logic V00.64.00

    • Payment App: Westpac v00.06.00

    • Middleware App: TSA V1.26
    • Middleware App: Merchant Entry v00.78.00
    • Middleware App: Business Logic V01.00.00

    Conditions /Comments:


    Approval Expires 11/12/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    MotorolaDCR7x00-200REFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: DCR7x00-200R Rev A
    DCRx00-200R Rev B
    Firmware version: DCR7x00-200R 2.25
    DCR7x00-200R 0.29
    DCR7x00-200R 0.34


    Approval Expires 07/12/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    DPS: Direct Payment SolutionsSKP200 & SCR200UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

    Hardware version: PIN Pad Display: SKP200: Release X
    Secure Card Reader: SCR200: Release X
    Secure Card Reader: SCR200RM: Release X
    Firmware version: PIN Pad Display: DPSSKP200 v1.0xx
    PIN Pad Display: DPSSKP200 v1.3.x.x
    Secure Card Reader: DPSSCR200 v1.2.x.x
    Secure Card Reader: DPSSCR200 v1.3.x.x
    Software version: NA

    Conditions /Comments:

    Payment Express LimitedSKP200 & SCR200UNATTENDED PAYMENT TERMINALS - SERIES 2 Yes (click)

    Hardware version: PIN Pad Display: SKP200: Release X
    Secure Card Reader: SCR200: Release X
    Secure Card Reader: SCR200RM: Release X
    Firmware version: PIN Pad Display: DPSSKP200 v1.0xx
    PIN Pad Display: DPSSKP200 v1.3.x.x
    Secure Card Reader: DPSSCR200 v1.2.x.x
    Secure Card Reader: DPSSCR200 v1.3.x.x
    Software version: NA

    Conditions /Comments:


    Approval Expires 04/12/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    CadmusCP03EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: CP03 G441-v2.0
    Firmware version: CP03SM APCA 1.16
    Software version: CP03 APCA 2.05

    VeriFoneSC5000EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M108-xxx-yx-xxx (y=A,B,C)
    Firmware version: OS 5.10
    Software version: security script APCA001

    Conditions /Comments:

    VeriFoneSC5000EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M108-xxx-yx-xxx (y=A,B,C)
    Firmware version: OS 5.10
    Software version: SC5x 1.169 1202 using security script AS2805

    Conditions /Comments:

    VeriFoneSC5000EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M108-xxx-yx-xxx (y=A,B,C)
    Firmware version: OS 5.10
    Software versions:

    • 1.1xx, using security script BBLSPS01
    • 1.1xx, using security script FDI_0001
    VeriFoneVx670EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M267-xyx-xx-xxx (y=1,2,3,4,5)
    Firmware version: QD0007A1
    QD0007A2
    QD0007A3
    QD0008A1
    QD0008A2
    QD0008A3
    QD0008A4
    QD0008A5
    QD0009A0
    QD0009A1
    QD0009A2
    QD0009A3
    QD0011A0
    QD0011A1
    QD00012A1
    Software versions:

    • CitiPOS 1.14, using security script: P3Cryto 1.12
    • PAYware POS MBL Version 1.5.xx, using security script MBL_0002
    • SoftPay Base 2.20 Version 1.3.xx, using security script BBLSPS01
    • SoftPay Base 3.0:PULSE 4.2.xx using security scripts: PULH0001 & PULH0001b
    • CBA Application v1.2.xx
    • FPOZ 3.x.xx using security script CRYPT001
    • PAYware POS Bendigo V3.3.xx: Security Script BBLSPS01
    VeriFoneVx670EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M267-xyx-xx-xxx (y=1,2,3,4,5)
    Firmware version: QD0007A1
    QD0007A2
    QD0007A3
    QD0008A1
    QD0008A2
    QD0008A3
    QD0008A4
    QD0008A5
    QD0009A0
    QD0009A1
    QD0009A2
    QD0009A3
    QD0011A0
    QD0011A1
    QD00012A1
    Software versions:

    • FPOZ v2.x, security script CRYPT001
    • PAYware POS Bendigo V3.3.xx: Security Script BBLSPS01

    Conditions /Comments:

    VeriFoneVx670EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M267-xyx-xx-xxx, where y =1,2,3,4,5 or 7
    Firmware version: QD0007A1
    QD0007A2
    QD0007A3
    QD0008A1
    QD0008A2
    QD0008A3
    QD0008A4
    QD0008A5
    QD0009A0
    QD0009A1
    QD0009A2
    QD0009A3
    QD0011A0
    QD0011A1
    QD0012A1
    Software versions:

    • PAYware POS Bendigo 2.3.xx
    • Travelex Application
    • PAYware POS Bendigo 3.3.xx: Security Script BBLSPS01

    Conditions /Comments:

    VeriFoneVx670EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M267-xyx-xx-xxx (y=1,2,3,4,5)
    Firmware version: QD0007A1
    QD0007A2
    QD0007A3
    QD0008A1
    QD0008A2
    QD0008A3
    QD0008A4
    QD0008A5
    QD0009A0
    QD0009A1
    QD0009A2
    QD0009A3
    QD0011A0
    QD0011A1
    QD00012A1
    Software versions:

    • APCA 001
    • PAYware POS Bendigo V3.3.xx: Security Script BBLSPS01

    Conditions /Comments:


    Approval Expires 18/11/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    NCRCx110ATM DEVICES - SERIES 2 Yes (click)

    Hardware version: ATM: 3010-xxxx-xxxx
    EPP: ETS2

    Firmware version: ATM: NCR Kalpana Android 01.00.xx.xx with scheme IAC 7/2015
    EPP: ETS2_01xxxxxxx with loader EL103xxx and touch fw41xx
    Software version: Kalpana Terminal 01.00.xx.xx

    Conditions /Comments:

    VeriFonee265EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M087-361-x0-xxx
    Firmware version: QTE35302.xxxxxxxx
    OP: 1.x.x.x
    Software version: None Yet Approved

    Conditions /Comments:

    VeriFonee355EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M087-351-x1-xxx
    Firmware version: QTE50301.xxxxxxxx
    QTE35301.xxxxxxxx
    OP: 1.x.x.x
    Software versions:

    • Verifone Australia – Payments as a Service
    • Softpay: 03.xx
    • SFEA: ENZSFEA01.00.xx
    • VSS Script: AUS 1.0
    • Middleware App: SPI v2.X.XX
    VeriFonee355EFTPOS PIN ENTRY DEVICES - SERIES 2

    Hardware version: M087-351-x1-xxx
    Firmware version: QTE50301.xxxxxxxx
    Software version: Adyen 1.xx.xx


    Approval Expires 24/10/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    VeriFoneVx570EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M257-5xx-xx-xxx
    Firmware version: QC0006A8, QC0008A5,QC0009A0,QC0009A1,QC0009A2,QC0009A3, QC0008A4,QC0011A0,QC0011A1,QC0011A2
    Software versions:

    • FPOZ v2.x, security script: CRYPT001
    • i-RIS thin client & security script v1.xx, i-Pay v2.xx application

    Conditions /Comments:

    VeriFoneVx570EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M257-5xx-xx-xxx
    Firmware version: QC0008A4, QC0008A5,QC0009A0,QC0009A1,QC0009A2,QC0009A3, QC0008A4,QC0011A0,QC0011A1,QC0011A2
    Software versions:

    • SoftPay Base 2.20 Version 1.2.xx, using security script: BBLSPS01
    • SoftPay Base 2.20 Version 1.3.xx, using security script BBLSPS01
    • PAYware POS MBL Version 1.5xx, using security script MBL_0002
    • FPOZ 3.x.xx using security script CRYPT001

    Conditions /Comments:

    VeriFoneVx570EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M257-5xx-xx-xxx
    Firmware version: QC0008A1, QC0008A5,QC0009A0,QC0009A1,QC0009A2,QC0009A3, QC0008A4,QC0011A0,QC0011A1,QC0011A2
    Software versions:

    • Security script: APCA001
    • FPOZ 3.x.xx using security script CRYPT001

    Conditions /Comments:

    VeriFoneVx570EFTPOS PIN ENTRY DEVICES - SERIES 2 Yes (click)

    Hardware version: M257-5xx-xx-xxx
    Firmware version: QC0008A1, QC0008A5,QC0009A0,QC0009A1,QC0009A2,QC0009A3, QC0008A4,QC0011A0,QC0011A1,QC0011A2
    Software versions:

    • FPOZ v0004 Vx570 Security script: CRYPT001
    • i-RIS thin client & security script v1.xx, i-Pay v2.xx application

    Conditions /Comments:


    Approval Expires 23/10/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    SafeNetProtectHost EFTSECURITY CONTROL MODULES - SERIES 2 Yes (click)

    Hardware version: PHEFT
    Firmware version: 4.6.3
    Software version: MarkII 08.04.01:M080401A

    Conditions /Comments:


    Approval Expires 20/10/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    SafeNetLuna EFT V1.4.7 with MKIISECURITY CONTROL MODULES - SERIES 2

    Hardware version: GRK-15 V 0100
    Firmware version: MAL1.1
    Software version: M090902E


    Approval Expires 01/08/2018

    MakeModelTypeApproval
    Type
    Conditions/
    Comments
    DioneSecura Integration ModuleENCRYPTING PIN PADS - SERIES 2

    Hardware version: SIMIH issue 4
    Firmware version: 6.55
    Software version: 1.44

    DioneSecura Integration ModuleENCRYPTING PIN PADS - SERIES 2

    Hardware version: SIMIH003 issue 10
    Firmware version: 6.73
    Software version: 1.05

    VeriFoneSecura Integration ModuleENCRYPTING PIN PADS - SERIES 2

    Hardware version: SIMIH issue 4
    Firmware version: 6.55
    Software version: 1.44

    VeriFoneSecura Integration ModuleENCRYPTING PIN PADS - SERIES 2

    Hardware version: SIMIH003 issue 10
    Firmware version: 6.73
    Software version: 1.05